lifter experiment
Uploader Comments (vahid2t)
All Comments (15)
-
@powermaks Now it is working, I made a frame from balsa wood and it works well :) check it out in my videos :)
-
@Berecz first, make sure there is no sharp edges anywhere on the foil or wire.
because 40 KV makes 4 cm sparks, it should either be fed a little less voltage, or put the wire(anode) higher.
but no too high. it needs to be just the right distance.
so thats it. the right distance, and smooth foil and strait wire
-
@Berecz first, make sure there is no sharp edges anywhere on the foil or wire.
because 40 KV makes 4 cm sparks, it should either be fed a little less voltage, or put the wire(anode) higher.
but no too high. it needs to be just the right distance.
so thats it. the right distance, and smooth foil and strait wire
-
I want to construct a basic triangle lifter. I already have like 40000VDC.
The question about the construction is that the positive electrode (the thin wire on the top) should be without isolation? I made one, but the distance between the electrodes was too small and I got sparkling and the whole thing burnt in flames...
but with 20kVDC it didnt fly, just some ion-wind came out. Any advices?
-
so... are all these aluminun and toothpick "lifters" on strings supposed to be like some kind of nerd "joke"? (i use the term loosely, at best.)
is this what passes for humor in the psuedo intellectual community these days?
seriously... this is all you got?
-
Exactly. Toroids, as Stan Deyo reccommends, are the next-level of force, should amplify the unidierectional force greatly! Also experimet with bifilar and cadeuceous-wound coils. Use ugh-current, low-Voltage PULSED DC on the toroidal coil. Use a hollow soft-iron(or Swedish Steel) core, with a square cross-section.
-
I see everyone making lifters, but no-one has had the inginuity yet to put a toroid coil in between the two capacitors yet.. that will circulate the thrust like a smoke ring, increasing the lift exponentially.. meaning you could carry a much much heavier payload, making manned flight easy.
-
Page 16 (pdf 20) of NASA's CR-2004-213312 in 2004 concluded that "we find that their operation is fully explained by a very simple theory that uses only electrostatic forces and the transfer of momentum by multiple collisions."
In short... ITS IONS, NOT ANTIGRAVITY!
-
I have read the NASA paper CR-2004-213312 (do a google search)
It concludes the Asymmetrical capacitor works by Ions and air... just like the other antigravity lifters. Even in the vacuum, Robert Talley wrote, "Direct experimental results show that under high vacuum conditions... no detectable propulsive force was electrostatically induced by applying a static potential difference... between test device electrodes..."
No body claims that it is Antigravity. It is just Electrogravity and the ionic propulsion causes the most powerfull trust.
vahid2t 3 years ago