Drill a hole (new camera test)
Loading...
Loading...
18,980
Loading...
1:00
Scratch built lathe test 1by dumpstercnc191,728 views- 2:53
Scratch built CNC Slantbed Lathe - RUNNING!by dumpstercnc136,759 views
- 0:04
Tour à métaux bb25-1by darty3677,052 views
- 7:32
60 tooth timing pulley high resby hossmachine16,938 views
- 1:16
Mike blowing at a Demo.by lizianp13,297 views
- 3:57
Peck drill (very small holes on the lathe)by Dividedhead156,007 views
- 6:08
CyberCNC's Fast Cut TA22by PKmode40,110 views
- 1:50
9x20 Lathe CNC Conversion - First test pieceby dareposte5,808 views
- 2:28
GTV-42 Gang-Tool Latheby CubicMachinery78,643 views
- 0:37
Center Drilling on a Latheby ManufacturingET25,071 views
- 1:19
Threading Basicsby e1m1s130,978 views
- 7:23
Nace la bebé de Elena y Dex en Second Lifeby wildbolita3axton12,291,635 views
- 0:55
Schlage Deadbolt 5 Minute Installby SchlageLocks16,012 views
- 1:18
Small Diameter Deep Hole Drillingby gibletboy10,703 views
- 0:51
CNC Turretby dumpstercnc109,304 views
- 0:37
augering hole with drill adapterby teacup1340,676 views
- 0:28
Drilling a square hole! (www.howround.com)by sangwinc190,355 views
- 1:15
How to Drill Porcelain Tile with Brazed Diamond Core Bits/Diamond Hole Sawsby applieddiamondtools29,814 views
- 3:40
Romi CNC Lathe Cutting British Pipe Threadby achtung253116,613 views
I'd like to make one like this, can You sell it as a kit, How much???
fireblade639 2 months ago
Nice machine You make, but I can't understand one- why You make this machine from some aluminium???? Aluminium is bad material for machine-build, also it isn't stable and hard, like steel or cast-iron.
FactoryDragon87 9 months ago
That must have gotten pretty hot!
kiwishuffler 2 years ago
lol why didn't you used the tailstock?
erklaerbaer01 3 years ago
how much did all the parts cost?
thnx
joeygonzo 3 years ago
T101 M3 G0 X0 Z 2.0;
M8 S900;
F1 Z-(absolute distance to go here);
G0 Z 2.0;
G0 Z200 X200;
M9;
M00;
helicoptered 3 years ago
bah i forgot M9 and M00:
helicoptered 3 years ago
I'd say that's a fairly good demonstration of hole drillage.
questionful 4 years ago