Installing A Kilduff Ratchet Shifter In My Oldsmobile Custom Cruiser Part 1
Loading...
Loading...
2,629
Loading...
Uploader Comments (TheStickman)
see all
All Comments (7)
-
how do you mount the actual shifter on the hump of the body
-
bracket & lever kit shifter cable how much was it all to buy?
-
would u need all that stuff for all shifters??
-
By the way, Nice Olds!
-
Thank you very much for posting this! I was looking at these, they look nice..
-
Good info man
Loading...
4:15
Installing A Kilduff Ratchet Shifter In My Oldsmobile Custom Cruiser Part 3by TheStickman2,381 views- 2:29
Installing A Kilduff Ratchet Shifter In My Oldsmobile Custom Cruiser Part 2by TheStickman1,224 views
- 3:05
supercharged el camino with Kilduff Shifterby briankilduff677 views
- 0:43
350 Swap in an Olds Custom Cruiserby TheStickman4,761 views
- 1:23
Custom Cruiser Full Exhaustby TheStickman2,848 views
- 1:17
1972 Oldsmobile Cutlass Supremeby 72cutlass724,605 views
- 9:02
Turbo 200-4R for the Vista Cruiserby spikedpunk1,471 views
- 0:26
1968 Elcamino burnoutby twingrip2,178 views
- 1:10
B&M hammer shifter on a 99 Mustang GT with a stage III transgo shift kitby huntergluck12,556 views
- 0:50
B&M Megashifter in a Dodge Ramby hemiramon22s8,631 views
- 1:04
Factory 1972 Pontiac ratcheting shifterby Oldsmob4552,125 views
- 0:39
Big Cam Cutlassby jpblack7467,954 views
- 4:21
1972 OLDS CUTLASS VIDEO#2 NEW ENGINEby garyfaraway1237,216 views
- 11:20
1989 Oldsmobile Custom Cruiser Station Wagonby MikeGuy9931,229 views
- 0:34
JCMS - First Start up with new motorby jcmsracing5,548 views
- 0:45
Rx7 with 350 V8 rear 180 into left hand driftby TheRx3509,595 views
- 4:42
Lokar Shifter Installationby LOKARINC3,548 views
- 0:29
cold start olds custom cruiserby codyfordf250512 views
- 6:10
1986 Oldsmobile Custom Cruiser Updateby focusonthegreen2,706 views
- 2:04
S-10 400+hp 383by rodney32165488,252 views
Well the shifter has holes in the bottom of the mount. What I did was to make some brackets that I welded to the floor that I could mount the sifter too. Basically some flat steel I bent to that it was flat where the shifter mounted and two legs going down that were welded to the hump.
TheStickman 1 year ago