Imco 5-flute Powerfeed, Varimill, Zcarb, Z-Carb, end mill
Loading...
Loading...
4,148
Loading...
Uploader Comments (exkenna)
see all
All Comments (5)
-
Nice short toolholder. Most guys use long holders and get lousy performance and they don't need the reach.
-
"Crap; I thought the sound was turned off!"
It almost is. They just turned the volume way down. There's no such thing as a machine with a silent spindle, much less silent cutting. "Magic endmills" don't exist.
Actually volume was probably +30dB.
-
Jessica Simpson asked how they'd make a cavity with sharp corners and was told that they'd use a SQUARE end mill and went away happy.
-
Crap; I thought the sound was turned off!
Loading...
2:08
Revolutionary High Speed Milling Technology Boosts Feeds And Speeds Up To 10Xby HighSpeedMilling12,384 views- 1:51
Ripper Mill at 7500 RPM and 240 inches per minute.by exkenna2,967 views
- 1:56
Swift Carb RampMill with Truemill Cutter Path - Heavy ramping, helical entryby swiftcarbcnc7,603 views
- 1:13
CNC Machine Tool Endmill Crash Oopsby nofalloff36,815 views
- 5:41
Z- CARB using VoluMill/Gibbscamby legeune309,023 views
- 5:06
IMCO Carbide Tool Inc.by EKaramol1,014 views
- 4:03
Sherline mill CNC machining Pocket Hole Millingby rdgtm8,655 views
- 4:21
Inconel Milling With Ceramic Insertby pescoban52,226 views
- 2:50
End Mill Grinder PP-25by peipingchang37,054 views
- 1:28
Slotting 1018 Steel with a Square Shoulder End Mill - DAPRAby dapracorp3,034 views
- 2:04
Roughing End Mill and power feed in actionby TroyOllom1,119 views
- 1:24
Dormer Tools TotalGrip™ - High performance Mechanical Chucks for milling applicationsby DormerGroup4,202 views
- 2:56
Helical End Mills Cutting: Aluminum, Titanium, & Inconelby PMIndustrial17,690 views
- 3:26
NINE9 NC Spot Drillby MCtooling11,048 views
- 8 videosPower Feeds
- 1:25
Cross slide power feed for small latheby NickMonteleone48,307 views
- 9:00
OKUMA MU-500VALby GW222021,847 views
- 3:43
[END MILL] OSG EXOCARB SUS End Millsby osgtool1,895 views
- 3:38
ZZM10a "Grinding the end mill"by Roelli13,773 views
- 9:17
End mill holders part final 2-2by tryally12,430 views
I shot this video using an old Sony still camera that happened to have an MPEG video mode. The mic on the camera is the size of a pinhead and any medium or high pitch noise sounds awful. The reverb off the side of the machine enclosure amplified the noise by a factor of ten so I turned it down. It actually sounded pretty good in real life.
Try this cut with your Varimill, Z-carb, or Monkey Mill.
exkenna 1 year ago