SCAVAPIANTE TAGLIO CEPPAIA

TECHNICAL CHARACTERISTICS:
Rootstocks cutting and harvesting Machine for motherplant;
Recommended: to all rootstocks producers;
Cutting circumference: disk diameter =600/700 mm
Horse power of your tractor required:70-100 hp
Cutting: 1 he per day
EASY TO USE, compact size (3000x5000 Height
1500) and road transport thanks to the study of a
special hinge which allows the machine to get a small
footprint (as in photo)
SINGLE SHAKING ELEMENT: to obtain the same
result as SP96, we have studied a longer shaking
element so that the plant can be shaked and cleaned
very well for the whole machine length.
INDEPENDENT ELECTRO-HYDRAULIC SYSTEM,
is composed of a series of electro-hydraulic control for
all movements of the machine a lever with cable
remote that sets in motion the widia disc cutting
flawless grafts, thanks to an axial piston pump IT200
controlling an engine piston IT200.
engine is connected to a control valve for pressure.
The disc has the potential to move to the correct
location of the cut through the ability to adjust the
disc to the vertical, lateral shift and tilt of the cut
stump to prevent burns to the rear. The hydraulic
system of exercise (shakers, tapes, steering ...) is
given by a pump 25 liters, with three independent
control of speed of the shaker and tape.
The machine is then hooked to attack only the
third point of the tractor and has a handling
system, regardless of positioning tractor which
has the task of rotating only the PTO shaft drive.
The hydraulic system is equipped with a heat
exchanger to prevent overheating and increase
the duration and the continued safety of the
machine at work.
FRONT HYDRAULIC WHEEL FOR
SUPPORT: to control depth and effort of its
excavation element, also in a difficult
conditions.
INDEPENDENT STEERING part of
excavation element.
SYSTEM INTRODUCED IN THE TAPE: to
collect and introduce the largest number of
rootstocks also end up in a way that even the
most open stump can be harvested.
REAR FLATBED to stock the product on
board.
2 REAR WHEEL that can be adjusted as
customer will, to give stability.
FACILITATOR COLLECTION SERIES: helps
storing large bundles of rootstocks without
slowing the machine and labor increasing the
yield of a good percentage of the collection (35%
-45%) in favorable conditions. equipment is
metallic, galvanized, applied to the end of the belt
end of the machine. It consists of a turntable
driven by pulleys of the machine. they are
expanded with soft material to create an outlet
without damaging the roots of cuttings and the
plant. The pulleys have lengthened the task of
supporting the cuttings at the time of grouping of
the belts on a fixed platform with the help of two
elastic springs that favor the grouping.
SIDE BRUSH to clean the rootstocks as
accessory
SMALL ROOF AND FLATBED that can be
stripped down as accessory
A ROLLER to unload bins as accessory

Category:

Science & Technology

Tags:

• ceppaia
• taglio
• ceppada
• portegreffe
• porte-greffe
• motherplant
• unterlagen
• schneiden
• schnitt
• cut
• rootstock harverst
• lift