Line6 Spider Valve HD100 Problems

The amp seems to be rebooting every few seconds and when it does, the sound cuts out completely.

Category:

Music

Tags:

• 100
• 7417

[mant2000]

Hi richeyrock,

Could you tell me which replacement part you replaced in maintenance center ?

I got the same issue and want to order a replacement part to solve the problem.

Thanks.

Norman

[richeyrock]

@mant2000 I wish I knew. They didn't tell me what they fixed and none of the paperwork detailed any parts.

[Bradlev]

I have the same issue with my Amp. Did you figure out what the issue was? driving me crazy. you can't use the head. works fine for around 2 hours then starts cutting out and acting weird. Help please.

[richeyrock]

Mine was still under warranty. I took it to an authorized repair center. They said they had seen a lot of these come through for repairs. I don't know what they fixed, but the did fix it. The paperwork didn't detail any of the parts or anything like that so I don't know what they did.

[richeyrock]

I haven't been able to get a hold of my local Line6 authorized repair service, so I don't know why it's doing it yet. I will post when I find out.

[thehardcoreguitarist]

Wouldnt u know it. I have the same amp... Barely used. And it cuts out. Sucks. I had high hopes for such a "good" amp.

[gitchist]

If you press the d button and hold it when the amp is off and turn the amp on while still holding the button down it will factory reset the amp . My amp has issues beyond this. First the pedals on the floor stopped working and now the head totally stopped working. I like the amps when they are working right but man what a POS

[wtfwasthatt]

@richeyrock Black Magic, of course.

[DECIFERTHIS09]

@richeyrock its a weak relay in the signal chain or the firmware is sensitive to voltage

[ariniballetten]

all it might be is your tubes. that happened in my buddies amp and we both have the pider valve HD100.

[fuct001]

just a thought mine did this twice and it was only cauze the power cable wasn't plugged all the way into the back. which happened after my bass player got a 15" hooked up to his stack so just make sure its the power cable is plugged in all the way if not it resolves this issue... also if the pedel tripps out then turn off the amp and hold down the D pedel and turn it back on and it fixes/resets the pedal (no u don't lose settings) just resets the pedal to amp connections

[mant2000]

Wow it is really helpful. I will tried to order the board and replace it

Thanks so much.

[EvolDiesel]

PN#50-02-9251

I was going to post a picture I took of this assembly but uTube won't let me (st00pid).

[EvolDiesel]

To clarify further...

The old PCBA

PN#: 35-00-0250-2

Rev: A

Date MFG: Jun 8 2007

...was replaced with the latest PCBA

PN#50-02-9251

[EvolDiesel]

For the next guy who goes looking for this, here's the answer...

Problem: Malfunctioning DSP Board

Solution: Replace malfunctioning DSP Board

Cost: $209 (parts and labor)

Who: Authorized Line 6 repair center

Time: About a week