Strut Tower Brace Install - WRX
Loading...
Link to this comment:
Uploader Comments (RalliTEK2008)
Top Comments
-
Every new vehicle should come with a strut tower brace. I don't see why they don't.
Or at least make it a factory option.
It DRASTICALLY increased stability in my 1997 Maxima when cornering or using on and off ramps around the city.
2 years ago 5
-
If you lift or otherwise remove the car from a perfectly level(in the planes of X,Y, and Z) surface, you shift the entire front suspension, however slightly. Everything bends.
Strut tower brace installs are best done on the ground, within 2 degrees perfectly flat in every direction.
2 years ago 2
All Comments (41)
-
What does a strut tower brace do? If anything
-
too much talk about nuts
-
Does it hit the plastic from the underside of the hood scoop?
-
Wow ur supposed to lift the car first lame ass
-
@pussytastegood1 The blue was just a protective film. He peels it off at 1:45.
-
Ok, time to get hated on. I installed a megan racing top strut on my 05 wrx, I didnt torque anything down to anything specific. Did I mess up? And on the bar I did the same thing. Just bolted it all up. Am I skipping any sets
-
Blue brace looks stupid on the red car
-
thats a cute little toy car
-
put a new intake on that... please...
-
what does a strut bar do?
- 2:09
Tein Front Strut Tower Brace- Whats in the Box?by rallysportdirect2,423 views
- 1:51
HOW STRUT BARS WORKby iexploderacoons6,888 views
- 0:26
K6F strut bar installby king6mx610,222 views
- 0:21
Popping Noise from Strutby bqluong53,542 views
- 5:01
08 Lancer ES Front Strut Bar Installationby J4SONM12,075 views
- 9:12
Remove & Replace Rear Strutsby richpin06a295,112 views
- 1:29
800hp STiby SAPBlog247,747 views
- 7:23
Effisency of Cusco Strut bar & Lower arm bar.wmvby TZOURDAS1,895 views
- 2:45
Red Overlays on a Subaru WRXby MrImrezaWRX22,792 views
- 0:49
DIY. Sway Bar Removal and Installation on Honda Civic EP3by soncep29,172 views
- 0:41
How to Install a New Strut - Precision Restorationsby PrecisionRestor4,759 views
- 1:27
HOW TO Install our Red Out Taillight modification kit on a WRX Sedanby BoostAddictV2414,566 views
- 3:35
Ultra Racing Bars test on Subaru and EVO 6by UltraRacingSdnBhd17,783 views
- 3:40
RalliTEK FSB Install 08 WRXby RalliTEK200811,996 views
- 0:31
Whiteline Flat Out - Strut bracingby Whitelineflatout1,905 views
- 5:03
WRX Belt installby DogsFTW34,208 views
- 3:01
08+ WRX/STi How to Install SPT Boost Gaugeby BlueAngelWRX23,982 views
- 0:37
Perrin 2008 WRX TMIC install video 3by imstuner1,383 views
- 3:39
RalliTEK Skidplate Installby RalliTEK20085,901 views
24ft lb it the torque spec listed from Subaru on the strut top bolts. (this is not a critical measurement. Just tighten them without breaking them)
The larger bolts in the brace itself can be tightened to 40ft lbs. (again just tighten them there is not need to measure. Tight is good enough. This is not a critical measurement.)
RalliTEK2008 1 year ago
hand tight is how tight u can get it with your hands not with a wrench
BLACKPOWER707 1 year ago
@BLACKPOWER707 LOL... 24lb ft ont the trut bolts.
RalliTEK2008 1 year ago
@BLACKPOWER707 LOL... 24lb ft ont the strut bolts.
RalliTEK2008 1 year ago
shouldnt the front wheels be off the ground b4 you remove the tower bolts -_-;;;
xkjnboix 2 years ago
No. If the wheels were off the ground the strut would drop into the fender well when the bolts are removed.
When installing a strut tower brace it is best to leave the vehicle on the ground.
RalliTEK2008 2 years ago