Redneck Tire Mounting
Uploader Comments (Green95Hoe)
Top Comments
-
"The fire sucking it in" Fucking Geniuses...
All Comments (500)
-
Just did this with my motorcycle tire. Can't get the front tire to pop...lol I had to put out with water...ill try again tomorrow...
-
A lot of car garages actually do this
-
Mythbusters called it busted. I have to say mythbusters totally missed the point if you are on the side the road and nave to take a tire off a rim and place another on same rim you can not inflate it until you seal the ring. If you don't get that seal you can have 50 air compressors but you will NEVER inflate the tire. The only chance you have is if you get some fuel and do this. We did this but removed the tiny thing in the stem so it would not vacumn. Then fill with air compressor.
-
LOL
-
all u had to do was put a lil bit of starting fluid around stick da air hose on it and it woulda inflated
-
Nothing new. I heard a similar technique was used by Jocelyn Wildenstein.
-
fastest tire mounting i ever seen !
-
ever tryed it with oxygen and esediline omfg crzyest thing i ever done
-
@upajos Remember when the fire inside the propellant expand the tire? When you quickly put in compressed air, the temperature differences caused the air and heat to make a vacuum that implode the tire from the inside. When you fill it with air, the tire returns back to normal shape. Try it with a hot 55-gal drum and cold water.
this is not your invention,you should delete that!! that trick has been used by truckers ever since big rigs were created!! FAIL!!
golfinrut 3 months ago
Now just when exactly do I claim to have invented this??? Don't be a dick. Obviously we've seen it done before and friends of mine did it years ago so I'm clearly not the first.
Green95Hoe 3 months ago 5
You guys suck a this. Yankee ingenuity? Yankee fail.
TheAustralianMade 5 months ago
Hardly a fail if it clearly worked.
Green95Hoe 5 months ago 14
Could the near-collapse of the tire be avoided if the valve is left out of the valve stem, so that as the gases cool and contract immediately after the explosion air could be sucked in through the stem?
upajos 8 months ago 3
My friend chose to do it this way so he could put the air chuck on it and replenish the air before the tire popped back off the bead as was the case on previous attempts due to the large rim size. I guess its a matter of preference really.
Green95Hoe 8 months ago