Big Bowl part two
Loading...
Link to this comment:
Uploader Comments (hansalex51)
Top Comments
-
Thats DANGEROUS man!!
3 years ago 3
-
WOAH! never adjust the tool rest while the machine is running! i know from experience that you can slip and jam it in the workpiece, sending it flying, i was lucky that no damage was done to me or the machine, but others have lost body parts.
work safe and live to work another day! keep it up dude!
2 years ago 2
All Comments (8)
-
lucky man; what can i say?
i never run the lathe with long shirt on
and one ended---in this huge piece :)
bravo
-
It wouldn't hurt — and in fact be much safer — to have the tail stock in place. And as you can see in the video, it wouldn't be in the way. Always use the tail stock. Better safe than injured or dead.
2 years ago 2
-
it's not dangerous if you know what you are doing (;
-
very nice work sir, thank you for posting, please click my name if you want to see my turnings.
-
Säljer du hantverk hemma eller i någon atelje eller hos en ekonomisk förening? =)
- 6:33Bowls from a big log.wmvby Videodon2712,981 views
- 5:52Natural Edged Bowl (2) Outside (1)by DarrellSF22,595 views
- 5:45Longworth Chuck at Indy Wood Show.mpgby coolhammerman14,013 views
- 8:04Big Bowl part threeby hansalex519,423 views
- 0:56Woodturning Bowl Coring Blooper - Kel McNaughto...by carvergirl142,310 views
- 9:27Hawaii Bowl Turner Elmer Adams PART #1by Htowngangstaz12,854 views
- 9:06Maple Bowl turned wet Part 2by Deoje36216,553 views
- 2:10MONSTER Bowl Sanderby randy4736010,181 views
- 5:54Wall Sculpture Turning Demo Pt. 2by djmarks4466,082 views
- 0:32Big Latheby JohnScottV219,064 views
- 0:21Woodturning a bowl on the VB-36by watch4david41,835 views
- 25:34Blair Davis--Turning trees inside outby canderso262,340 views
- 1:57turning timber column on latheby timberman1274,913 views
- 1:04Drying Bowlsby Bowlmaker1036,648 views
- 3:35Perfection in Formby bernardbla79,997 views
- 1:14Woodturning: Finishing & Buffing a Bowl : Unfin...by expertvillage28,547 views
- 5:22Woodturning - eccentric goblet 2by shovel53144,410 views
- 10:49Woodcut Bowlsaverby woodcut289,922 views
- 3:58Ray Allenby bernardbla32,277 views
- 3:41Segmented Wood Turning Scuplture: "A Coat of Ma...by ronnaneil269,802 views
Vad var det för typ av patron?
Yleski 4 years ago
Det är en bit rör 60mm med konisk insida och en krage där den spänns direkt i chucken. När jag svarvar utsida använder jag en kraftig fransk träskruv utan skalle, också direkt i chucken. Enkelt och smidigt!
hansalex51 4 years ago