Marzocchi 66 RC2X Part II - Rebuilding

Putting it all back together,fitting new seals, filling the fork with oil and getting ready for more riding...

Category:

Sports

Tags:

• marzocchi
• 66rc2x
• rc2x
• seals
• rebuilding

[dhtheo]

great vid very informative, my forks are drop off triples and are air sprung would it be a similar method to the coil sprung forks ?

[blumpher]

@dhtheo yes based on my experience...no springs obviously, just air chamber where coils are.Have fun....

[staikeinthahood]

Thank you so much! I'm picking up a bike with this fork tomorrow and I got kinda worried since it needed to be seviced. But now I'm just looking forward to the service. Very great and helpful videos! :)

[blumpher]

@staikeinthahood enjoy...as they are fantastic forks.

[Kuerbisketchup]

i'm a little bit confused, cause on my fork the rc2 cartridge is at the right side (black cap) and at the end of the fork there is the red turning knob. You have ur turning knob at the left side, so you propably changed your cartridges but didnt changed your upper (red/black) caps, am i right?! so you see, a lil bit confusing :D

[blumpher]

@Kuerbisketchup sharp eyes! I did put them back in the wrong sides I think, but have put them back in the propers sides now.

[bagheadbaby]

listenin to abbit of bbc radio 4?

this guys got style!

[ker0118]

THANK YOU! The video is very helpfull! At least for me, since I'm about to do this on my 66 Marz for the 1st time (by myself!)... Just one comment for oil mixing (at 4.09). Mixing 5W and 10W in equal amounts, would give you a little bit more than 7.5W. The actuall mix to get 7.5W, while mixing other W's would be:

57% 5W and 43% 10W

18% 10W and 82% 2.5W

43% 15W and 57% 2.5W

73%15W and 27% 5W

[Bubbacavcrazy]

hmm £90+P&P to send them off or about £35 to do it myself. THANKS!

[saschaweide]

thanks for the perfekt vid