My CSX/NS HO Railroad Part 4
Loading...
Uploaded by flymanjg on Jul 18, 2009
Some Shots of the Railroad Wiring, Switch Frog wiring, DCC control and Circuit Breakers.
Uploader Comments (flymanjg)
Top Comments
-
You have very good benchwork and the wiring of the layout is good. My wiring has gotten so much better with experience but when I fist began my layout I was not concerned with color coding and much else. Now my underneath layout in the west end of the layout is nice but the east end is a bit rough. I have redone a lot of it but not all of it.
2 years ago 4
-
OK, now you are making me want to tear mine down and start over!! I need to learn a LOT more about DCC...
2 years ago 3
All Comments (15)
-
What kind of switch machine are you using at around minute 1:43 in the video? There are 4 knobs in a green facia that look like they are connected to some sort of manual/pneumatic switch machine. What are they and where did you get them? I am looking for an undertrack manual switch for areas close to my edges.
Thanks
-
oh good If you could use speaker wire your lucky since its easy to wire. I first used speaker wire until I relised that its cuting back the power flow.
-
Speaker wire only for the Tortoise switch machines. My DCC Bus is 14ga with 18ga feeders.
-
Your lucky you get to use speakerwire my dcc put so much power to the track I have to use thicker wire
- 100 videosYouTube Mix for Incubus
- 3:00
My CSX/NS Railroad Part 5by flymanjg11,274 views
- 4:39
My layout - part 6by Pallesen0123,811 views
- 4:22
My CSX/NS Ho Railroad Part 13 "Continuing with the second level".by flymanjg4,656 views
- 3:45
My CSX/NS HO Railroad Part 55 "The Drainage Ditch"by flymanjg4,107 views
- 8:49
My CSX/NS HO Railroad Part 43 A "Finishing the Kato C40-9 conversion"by flymanjg11,458 views
- 2:35
SmartSwitch with SmartFrog turnout route control testby anemodel18,397 views
- 4:50
My CSX/NS HO Railroad part 17B "More on the Hare/Tortoise Connection"by flymanjg4,746 views
- 2:24
Building a Model Railroad Series #5--Wiring & Command Controlby GreenFrogVideos29,777 views
- 4:02
My CSX/NS HO Railroad construction Part 3by flymanjg45,256 views
- 3:06
My CSX/NS HO Railroad Part 11 "More on Signals"by flymanjg7,498 views
- 3:56
My CSX NS HO Railroad part 1by flymanjg14,157 views
- 2:58
My CSX/NS HO Railroad Part 37 "New Addition"by flymanjg8,485 views
- 9:27
My CSX/NS HO Railroad Part 17A "More on the Hare/Tortoise Connection"by flymanjg5,222 views
- 9:54
My CSX/NS HO Railroad Part 30B "Beginning to ballast track"by flymanjg9,014 views
- 6:46
My CSX/NS Ho Railroad Part 9 "Auto Throw Operation"by flymanjg18,600 views
- 9:48
My CSX/NS HO Railroad Part 48 A "Railroad Crossing at the Locomotive Shop"by flymanjg7,509 views
- 9:44
My CSX/NS HO Railroad Part 26D "Installing a QSI Sound decoder in an Athearn AMD-103by flymanjg25,492 views
- 8:15
My CSX/NS HO Railroad Part 26A "Installing a sound decoder in an Athearn AMD-103/P42"by flymanjg8,840 views
- 7:55
My CSX/NS HO Railroad Part 38 A "Tunnel Portal"by flymanjg5,065 views
I noticed you have a MRC Prodigy Wireless, what made you decide on using the MRC? Also the circuit breakers are they a must for DCC?
xrrtracks 2 years ago
MRC = Simple to use and expandable
Circuit breakers = not a must (but beneficial)
flymanjg 2 years ago
What track and turnouts are you using
dlbii1970 2 years ago
Atlas code 83 with atlas #6 and 8 turnouts
flymanjg 2 years ago
hello, why you have two black boxes to the wireless control?. is it a prodigy express?
jamondere 2 years ago
1 command station 1 power booster
flymanjg 2 years ago