HOLZMA HPL 11/56/22/L/D/2E-HER BEAM PANEL SAW

NUMERIC CONTROLLED BEAM PANEL SAW WITH AUTOMATIC LOADING
GENERAL SPECIFICATIONS
► Industrial machine with heavy-duty structure
► Machine condition: very good
► Useful working cutting width 5.600 mm
► Useful working cutting length 5.600 mm
► Max. main blade projection 125 mm
► Double automatic lateral aligner with pneumatic cylinders. The aligning cylinders are one before and one after the cutting line
FEEDING AND STACKING OF THE PANELS
► Panels stacking: front and manual
► Panels loading: automatic, with rear lifting table - table dimensions 5.600 X 2.200 mm
► Loading of the panels row on the lifting table through: - nr. 2 motorized roller conveyor for lateral preloading on right side
► Suction cup device to rotate the panel of 90 degree - total nr. 12 suction cups - the package is lifted, turned and put down on the wheels of the machine table without any friction with it. The turning station can execute very complicated cutting patterns which require one or more pre-cuttings for a better use of the panel surface. Package clamping devices and high rotation speed allow reduced working times and packages perfectly aligned
► Supporting table under the pusher carriage equipped with idle rollers to avoid any scratching on the panels
FRONT SUPPORTING TABLES
► Nr. 1 fixed front table with with additional guide - covered by bachelite - air blowing device - table dimension 650 X 2.810 mm
► Nr. 4 movable front tables - covered by bachelite - air blowing device - tables dimension 650 X 2.810 mm
SAW CARRIAGE TECHNICAL DATA
► Speed of saw carriage: - forward 5-125 m/min. - back 125 m/min
► Carriage with main blade and scoring saw units
► Main blade - max. tool diameter 450 mm - motor power 13.5 KW
► Scoring saw - max. tool diameter 180 mm - motor power 2.2 KW
► "Quick change" system of the saw blades
PUSHER TECHNICAL DATA
► Motorized pusher carriage - nr. 9 grippers to clamp the package of panels
► Speed of the carriage: - forward 10-80 m/min. - back 80 m/min
CONTROL OF THE MACHINE AND ACCESSORIES
► Control and program system CADMATIC 3.0 with the following features: - pc - screen colour - CD-ROM reader - floppy disk reader - keyboard
► Optimisation software of the cutting patterns
► Adjustable hanging command board to control the machine
► Incorporated electrical cabinet
NORM AND OPTIONAL FOR THE SECURITY
► Security norm CE mark
► Protection grids installed on the machine
► Rear safety photo-electric cells
► Total installed power 28.5 KW

Category:

Science & Technology

Tags:

• BEAM
• PANEL
• SAW