EXI 450 - Flybarless No Stabilization - Test 2
Loading...
Link to this comment:
Uploader Comments (CJVideoProductions)
All Comments (6)
-
one note on your problem! you should design a head thats a copy used for the bell 206. Its flybarless but has a rotor teter hinge!
-
Hi guys. After lots of research and testing I've found out that the only way to go flybarless is to have the control points for the main blade grips exactly 90 degrees BEFORE the LE (leading edge). This means having the blade grips flipped around from how they would normally be. Hope that helps. Happy flying
-
also the placement of my servos are....
one in the front and 2 in the back as you see in my video...... don't know if that will make a difference?
-
ok just for fun.... get rid of the mixing arms that go to your blade grips...... flip your grips 180 and do a direct link from the swash to the blade grip.... that's the way mine is and works great..... so with the 4 balls on your swash... 2 go to the wash out arms and the other 2 go to your blade grips that are fliped....
3:36
EXI 450 - Flybarless No Stabilization - First Testby CJVideoProductions4,594 views- 2:09
Flybarless 450 No Stabilization - Test 4 - Smartmodel Weighted Scale Bladesby CJVideoProductions2,310 views
- 3:48
EXI 450 - Two Crashes in One Flight - ESC Low Voltage Cutoffby CJVideoProductions577 views
- 2:18
EXI 450 Flybarless No Stabilization - Test 6 - Forward Flightby CJVideoProductions583 views
- 2:24
Airwolf CRASH !! (450 Size)Flybarless First testby krumrick2283,552 views
- 1:03
A close look at my custom 450 FBL headby CJVideoProductions3,276 views
- 7:04
Trex 450 flybarless setup part 2by helipilot943,509 views
- 1:10
flybarless mythbusters episode Iby mnentwig5,616 views
- 0:49
HK-450 flybarless setup overviewby mmosca30,777 views
- 4:37
Donnie D's Century Bell 47Gby CJVideoProductions3,906 views
- 0:25
Flybarless head setupby mlkm1815,110 views
- 5:38
EXI450 - Flybarless - No Stabilization - Test 7by CJVideoProductions360 views
- 6:48
Trex 450 flybarless setup part 1by helipilot9411,845 views
- 3:28
NOT STABILIZED Flybarless T-Rex 450by demulder712,331 views
- 7:22
Flybarless test X-Cell 1004 SE Without Stabilizationby krumrick28,655 views
- 1:46
EXI 450 FBL No Stabilization - Test 3by CJVideoProductions437 views
- 5:44
FLYBARLESS BELT CP OUTSIDE TEST 2 GOOD SETTINGS!!by erwin15erwin546 views
- 7:34
EXI 450by jstcriusen1,233 views
- 4:08
FLYBARLESS BELT CP FORWARD FLIGHT #2 NO DIGITAL ASSISTANCEby erwin15erwin653 views
- 10:00
How RC Helicopters Work: Fixed Pitch and Collective Pitchby CJVideoProductions20,829 views
FWIW - After making this video I remembered that because of gyroscopic precession, the dissymmetry of lift manifests 90 degrees later, so this causes a nose up tendency in forward flight. My problem is caused by my swash timing being off (I think), which I haven't had time to address yet. Check back for updates!!
CJVideoProductions 2 years ago