this is a sunracer v3 with the following electronics: NEU 1110/1y pheonix 80 esc two HS-56HB servos on ailerons 1 diamond 60 (d-60) on elevator thunder power 2250 45c battery ( i also have a 2650 45c battery) 4.75X5.5 prop
@alamray no, but on my second flight with this plane i had bad flutter that striped both servos in the wing causing the plane to lose all roll control. fortunatley enough i got it on the ground unhurt. the cause of the problem was the massive gap between the bottom of the ailerons and the leading edge of the wing! 2 new sets of gears and a roll of hinge tape later it flies great and 50+ flights later absolutely no problems. shame about you plane :( is she a total loss, or is she fixable? thanks!
@b1bman yea i like mine alot!! and that is one fast setup on yours, whats in it? this was its second flight or so so it never hit over 150. but now i got it going about 180-185.
did you move your serovs to the wing? i got flutter on mine and lost it. very loud crazy flutter. ... torque rods are horrible
alamray 3 months ago
@alamray no, but on my second flight with this plane i had bad flutter that striped both servos in the wing causing the plane to lose all roll control. fortunatley enough i got it on the ground unhurt. the cause of the problem was the massive gap between the bottom of the ailerons and the leading edge of the wing! 2 new sets of gears and a roll of hinge tape later it flies great and 50+ flights later absolutely no problems. shame about you plane :( is she a total loss, or is she fixable? thanks!
1995rchelipilot 3 months ago
does the motor ever overheats with that big prop?? i thought the max prop to use on this setup is a 4.1x4.1
thanks
alamray 3 months ago
@alamray yes, it will if you run it for more that 10 seconds full throttle.
thanks for watching
1995rchelipilot 3 months ago