Boss NS-2 Noise Supressor Demo w/Ibanez RG1550
Uploader Comments (DrifterTrueno)
All Comments (24)
-
@DrifterTrueno Hey !! Sorry to bother you with this but , is this amp good for 80s Hard Rock like Van Halen and Whitesnake stuff ?
-
Or you go to the back of the head and turn the ground off because that's where the hum is coming from(no rhyme intended)
-
Nice tone.What are you overdrive settings on?
-
what power suply do you use for this pedal, or do you use a battery,
-
Do you ever hear a ticking sound in your randall? I hear it mine but I'm not sure if it's the head, the cab, my pickups, or something in the electric current. I have a compressor/limiter/noise gate in the effects loop. I'm probably get a Furman and maybe drop a gate in front of it. Hope it'll fix it.
-
fucking magical, i have one of these now i have to buy an adapter.
-
how well does it work to control feedback?
-
@ibruse yes
-
so 1 question... the setup is:
Guitar>Dist.pedal>noisegate>Ra
ndall? -
@MoonlightShadowlolz in my humble opinion, the first stomp box on your pedal board chain should be the ns2 if ever you're running it in series. Why? cause it cleans out the signal coming from your guitar so when the signal flows to the dirt pedals, the unwanted signals won't get amplified by the distortion and what not. I run mine in series and it's the first on the pedal board now....after a long time of putting it in the last, very big diff. and no more tone suck :)
Dude I have that same guitar but I got the pumpkin colored one. They rock!
klpinvestments 2 years ago
Yeah it does rock, except the stock pickups are kinda weak, i swapped the pickups for dimarzio paf pros.
DrifterTrueno 2 years ago
what settings are your NS-2 on?!?!?!?
I can't get mine to work properly
J5S7hXc 2 years ago
i have the Threshold set at 3 o'clock & the Decay i have it off.
DrifterTrueno 2 years ago
it's not on mute right?
J5S7hXc 2 years ago
Correct its on Reduction.
DrifterTrueno 2 years ago