freshly built KA24DE knocking...
Loading...
Loading...
10,628
Loading...
Uploader Comments (dualshock28)
see all
All Comments (24)
-
Sr20 FTW!
-
dood that looks like my kat lol same color val.cover
-
@dualshock28 how much it cost u to rebuild?
-
ooooouch
-
@dualshock28 lol FAIL
-
sounds like E.T ...THAT ALEIN GUY
-
@dualshock28 - lol, nice
-
damb been in same position except my problem was dumb ass napa gave me the wrong bearing which some how fit but i was a litttle tipsy and didnt notice the oiling holes wernt lining up 250 miles later caaaabooooooom tat tat tat
-
@supraman121 thats because you have hydrailic lifters and their is air pockets inside the liftrer instead of oil
Loading...
0:31
leons ka24detby nissy929,028 views- 1:38
1996 mustang gt seafoam detonationby Speedstang4604,006 views
- 3:03
S14 rb20det vs S13 ka24detby driftomike11,599 views
- 0:15
Supercharged 240sx ka24deby adamky17,308 views
- 5:14
lower-timing-explained, ka24det. Factory Settingsby walperstyle3,401 views
- 1:17
Lucas Heavy Duty Oil Stabilizer Tutorialby LucasOilUK38,807 views
- 0:06
timing chain noiseby galapogos01133,007 views
- 4:23
cold ka24de startby 98camaroz2,809 views
- 2:00
KA-T 240sx start up after build and swapby kenbuilt240sx8,646 views
- 0:25
KA24DE about to goby lightfighter5403,558 views
- 0:57
240SX First Startby sr5p33d1,606 views
- 1:36
V8 240sx Drifting!!!by ChrisJuliano53,586 views
- 0:28
KA24DE timing chain noise/rattleby democorleone44,725 views
- 0:37
KA24DE turbo freshly built with arias forged pistons, CROWER cams 264 durationby turbobyholset3,388 views
- 1:31
240sx first start on rebuild 90mm with 60mm garrett full build.by NemansMQ4,370 views
- 0:25
Ka24e-t built motorby BigDarrelton3,996 views
- 0:36
95 Nissan 240sx ka24det, sr20 KILLERby skipp197082,474 views
- 0:55
ka24de, header back exhaust, brian crower camsby toothpicsk811,024 views
- 0:28
My intercooler setup KA24DEby MTX45017,304 views
I put the rod caps on backwards lol. I have a new engine now so it's all good.
dualshock28 2 years ago
I have no clue, it sounds like rod knock so I'm guessing that's what it is. Maybe my rod bolts were stretched so the bearings were more prone to spinning, I'm really not sure though. It sucks...the rebuild was a waste of time and money.
dualshock28 3 years ago