Snapper RER

This the te first start of my Snapper Rear Engine Rider since last fall. When I put it away, all ran well, as you can see, this is not the case now.

It has a 10HP Briggs & Stratton engine, and if I remember correctly, was built in 1979. All of the equipment you see in my videos is mine and was bought with my own money.

Category:

Entertainment

Tags:

• Snapper
• RER
• rear
• engine
• rider
• 10
• HP
• Horse
• power
• briggs
• stratton
• 28
• inch
• riding
• lawn
• mower
• 1979
• start
• first
• spring

[jhaley12]

how the hell do you get the belt to feed between the clutch ass. and pulley? i've tried everything.HELP

[launboy8]

Are you talking about the pulleys for the deck? Go to opeonthenet-DOT-com, they should be able to help you out.

[sonofjabba]

Mine leaks out the carburetor too. Because it needs a carburetor.. LOL Jabba is Super Cheap and doesn't care....

Mine was plugged solid when I got my junk wagon. But it PULL STARTS Normally on the 2nd or 3rd PULL... Yeah Who Needs a Lousy Electric Starter?

[CSAKvids]

I know. I've been out in the woods with mine and countless times my battery died, and I wished so much I had a pull start.

[launboy8]

My battery hasn't died on me yet... But sometimes when the engine is hot, the starter doesn't have the power to turn it over. Letting the engine cool solves the problem, but a Pull starter would have been nice.

[launboy8]

Lol... The carb is STILL off the engine, half apart, sitting in the shed. I need to get off my azz and get that rebuild kit! I hope I haven't lost anything important... lol

Might sell it this summer if I get it running. I've got no use for it anymore.(sorta kinda)

[th19940305]

I love those snapper RER

[farmer123ish]

ahh the old snapper lawn mowers best and simplest lawn mowers ever

[randy1807]

@drm3105 the problem is the jet seal on the carb.bowl thats screws into the bottom of the bowl...... take it out and look by the tip that screws into the bottom of the carb ther is a little seal or your float is dirty

[randy1807]

@jhaley12 just remove the pulley or the belt guide to re route the new belt.........thanx

[drm3105]

I KNOWN WHAT IT IS ITS THE GAS LINE THING THATS DRIPING GAS I KNOW BECAUSE MY SNAPPER HAS THE SAME PROBLEM AS THAT TO!!!

[TheHulkamaniabrother]

that gas coming from the carb of course almost always means that your needle and seat is stuck open from shit clogged in it or a bad float. spray the carb out with compressed air or if that doesnt work just grab a carb kit and rebuild it. easy fix

[JHx86]

how many cranking amps does that battery have?

[walkingfreak]

Also be lucky you have a battery that cranks over that long myne wont crank an engine without the help of a battery starter it suckss

[walkingfreak]

it doesn't flood at all with cranking for a long period of time iv never been able to flood any of my engines ( soon to get videos of a 12.5HP engine startingr rebuilt with all new things)

[jhaley12]

yeah, thanks alot .