Mini-Motor-Gen (Try 2) part2

A self powering, self running, motor generator combo. This is a mini-model I have been building for some time. Once I have a perfected model I will double then tripple it's output of DC power, for now I want to just get it run forever, or at least till the bearing lock up under it's own power. This is very very close to my Goal.

Category:

Science & Technology

Tags:

• overunity
• generator
• self
• running
• powering
• zero
• point

[mthemaniac]

@ufopolitics The thing is that you need to clarify that current is not changed or is increased. Saying things like "volts of power" is just plain wrong. If you are maintaining equal or greater current and increasing voltage then yes, it works! I never said your device doesn't work just that you didn't do an adequate job of proving it works. Demonstrate it properly, demonstrate power not voltage or demonstrate both current and voltage at the same time. I want this to work!

[ufopolitics]

@mthemaniac : Now, an example, if You get In 12 Volts and 30 Amps in an specific system or 'apparatus', you have input 360 Watts of Power...If You get Out (Output) 200 Volts and 10 Amps, that means You have 2000 Watts of Power, even with smaller Amperage in the Output. So, Output>Input.

You have to do some more study, my friend, you're not capable to argue with me...learn some more.

[ufopolitics]

Now I will answer in public to your "private" message...

I know exactly that Voltage is not Power, but it is 50% of it, since Power(W)=V. I , Then it means they are (V&I) directly proportional to Power, meaning, if You increase Voltage(V) or Amperage (I), Power will also Increase.

Therefore, a Voltage DOES demonstrates a Power Gain!!

[ufopolitics]

@mthemaniac: You sent me this private message...Why not public??, so anyone could read it??

To:ufopolitics

Yes, you are comparing voltages, voltage is not power. I really wish this worked but you have to demonstrate a power gain, a voltage gain does not demonstrate this. If you can demonstrate a power gain then that would be really cool. Put current meters in along with the volt meters.

Thanks

Mk

[ufopolitics]

@Rod5157: My opinion to your experiment is to add a Pulsed Width Modulator Controller, and test the outputs with an Electrolytic Cap connected, to retain-store the Max Volts Out, etc...then read it off the Cap.

The Ideal testing would be with a Dual Channel Oscilloscope.. Channel A Input, Ch B On Output...

Keep up your work, is good...It is similar to a combination of Beddini's-Searl Motors Generators...search them.

[ufopolitics]

@smokemansmoker : No you can not do that...because there must be a "constant" supply in order to render an output. Just "spinning it" would not generate a steady, constant Input. even if the Output is higher than Input.

[ufopolitics]

@mthemaniac : Do You think that every one that had worked on this projects along our history, is an Ignorant, a "Garage" Lab Worker, without the basic knowledge into the "Real Books" Of Electronics, Electromagnetism, Electricity, etc,etc?

Try Me...

[ufopolitics]

@mthemaniac :

Had You ever heard of Radiant Energy, Zero Point or Ether?...

Had You heard of Dr. Aspden proven thesis?

Do You know who Ed Gray was?...Know about His Motor?

Do You know who was DR. Thomas Henry Moray?

Ever Heard of Floyd Sweet and his VTA?

And finally...Ever heard of Nikola Tesla?

Well, it seems You know some electronics-Electricity, the one the Orthodox Science had shown to you...and You obviously, abide and totally devoted to them...

[ke4uyp]

Why would anyone spend several months building a device like this and not take two minutes to google measuring power output is beyond me.

[mthemaniac]

All these over unity magnetic motor guys are brilliant enough to create these devices yet haven't the elementary knowledge to properly demonstrate the results. Even if by some miracle they actually discovered something, they don't know how to demonstrate it and thus will be branded as fakers. I wish just one of them would read a basic electronics book then come back with proof the device works. Of course the ones that take this step certainly will discover their device does not work.