Slipper clutch would let the engine 'catch up' when throttle is applied. Do it on front and back wheels for two wheel drive, probably get about 150 mpg at 55-60 mph!
Hey, howcome you can't make the rotors from carbon fiber and embed some rare earth magnets in them, face every other one opposite directions n-s s-n , take a four pot brake rotor and put an electro magnet in the 1st and 4th position, add a 500w stator with a sensor system to fire the electromagnets like a monorail uses and turn the rotor into an electric motor to push/pull the bike along at cruising speeds with the motor idling at about 1200rpms.
I love that fact that when Harley shut down and tried to sell off buell it was the only segment of harley davidson that was in the black
theinvictus1 5 months ago
Eric should have went to Victory and see if they would help fund his company.
m109r67 10 months ago
I wish HD would have not shut Buell down.. Sorry butt holes..It prolly hard to get parts for buell now.
m109r67 11 months ago
R.I.P XB12X:(
xbowhntrzx 1 year ago
@wcwiegman
you can but it would be heavy and expensive! That's a couple million dollars in r&d to replace a system that work's grate in the first place.
RazedByWolvs 1 year ago
Sounds like a good idea on 4 wheels...
KirknDE 2 years ago
Slipper clutch would let the engine 'catch up' when throttle is applied. Do it on front and back wheels for two wheel drive, probably get about 150 mpg at 55-60 mph!
wcwiegman 3 years ago
Hey, howcome you can't make the rotors from carbon fiber and embed some rare earth magnets in them, face every other one opposite directions n-s s-n , take a four pot brake rotor and put an electro magnet in the 1st and 4th position, add a 500w stator with a sensor system to fire the electromagnets like a monorail uses and turn the rotor into an electric motor to push/pull the bike along at cruising speeds with the motor idling at about 1200rpms.
wcwiegman 3 years ago