pick/bypass luggage locks
Uploader Comments (bruno2260)
Top Comments
-
you sshould get a job as say a lock smith (well you probably are well or a burgler) you would be able to unlock everything and tell ppl how they can protect themselves against getting robbed and such
-
so nice i going to try this home
All Comments (33)
-
Thanks!
-
Do you have any ideas for unlocking a Zero Halliburton combination lock?
-
@stome77 Are you serious? Not even locks on refrigerators with a hairpin? Those are so easy!
-
any chance you, or anyone here, could give me some info on how to bypass lock? iv been trying to figure it out for a while and cant find any info on how it actually works! any info is appreciated!
-
@bruno2260 I need some help, im trying to get into a masterlock and im using a pick very simular to your's and it wont unlock im sliding it in to the right and sliding to the left, and it wont unlock , any tips?
-
@krackannv you can take preventions on getting high security locks and what not but if your going to lock up something like say a house ure gonna want to have a security system... as far as locks go any lock can be bypassed.
-
What are the best types of guerilla-type picks you can build for luggage locks?
I have a nice standard set of picks, but I always enjoy trying things from "scratch" and seeing what I can do.
A simple safety pin with an 80deg bend of the last 2.5mm and a bobby-pin tension wrench worked very well for my 5-pin drawer lock, even as quickly as two rakes in about 4 seconds to open; I was surprised =P
I have a small golden luggage lock with a 5-pin key I can't seem to get open; just once after ~25min
-
how many locks would u say can be bypassed like tht i accidentally figured out bypassing when fiddling around with a lock i have and i dont have any idea how many locks u can do it to
quick queston, once u pick the lock, does the lock break? or u can lock it and open it the same? im just worried if i pick the lock, i would damage the lock
bodybuilder718 1 year ago
@bodybuilder718 No, the locks are fine. That's the hole object behind picking & bypassing, to open locks which you have no key using nondestructive entry methods and showing no signs of forced entry.
bruno2260 1 year ago
I have five of the dial phone locks from Abus, In my opinion they are not that difficult to pick at all no matter what manufacturer the lock is, I suppose thats due to the lock body size leaving little room for the pins.
Bruno, Now that you have mastered Cylinder locks why not try mastering BS3621 5 lever Mortice Deadlocks, I have been picking locks since I was 7 and I have been converted to lever lock picking, Cylinder locks are just too easy, Where's the challange?.
ursusarctosuk 4 years ago
There isn't really need to know, since lever locks aren't widely used by the public. I tried searching BS3621, but couldn't find that model. Can you give more info on that lock and I'll try to get one, or something close.
bruno2260 4 years ago
So if your saying the tsa locks are master keyed... then we should cut one open...get the pins out and cut us our own master key...
Slimpickingsooooo 4 years ago
I'm not sure if it's an actual master key. On Master lock website they call it a "special tool". But yea eather way if you cut one open I'm sure you can make a universal tool or key to open TSA locks.
bruno2260 4 years ago