FlyCamOne2 with remote shutter interface

FlyCamOne2 with remote shutter interface

Category:

Sports

Tags:

• flycamone2
• flycam
• rc
• planes
• remote
• control
• plane
• one
• flycam1
• Remote Control
• Flying
• Air
• Airplane
• Helicopter
• Aircraft

[nelnic]

Is the remote shutter interface also able to power the camera? The battery on my FlyCamOne2 no longer gets 30 minutes.

[Barnstormer1920]

Sorry for the dely in reply, Not that I am aware

[keydogi]

hello

I like to control the camera.(on\ off picture and video fron the transmitter)

I just need to connect the 3 (from 4) pins to channel in the receiver?

thanks

[Barnstormer1920]

Not sure of your question but if you connect the interface correctly you should be able to turn on and of the video via your transmitter during flight but you cant alternate between video and pictures during flight

[JOHN26ist]

i found that i wiped out a recoding by switching off and not pressing the shutter

j.t.

[Barnstormer1920]

Not sure of your question but the quality of the video image is not fantastic but more than adequate for model aircraft, As I dont know what monitor you have its difficult to say, sorry

[TzacheRXN]

And at least can i use this cam whit a small monitor ( display ) to see what image I take ?

[TzacheRXN]

Hi.

I understand that this camera can be controled ( moved ) from the airplane Rc ?

When i fly can i change the position of the cam ? Tank You.

[Barnstormer1920]

I would not recommend this. I dont use the Velcro I use large rubber bands (the sort you use to attach wing on some models) with a pad of foam between the camera and the wing but I use 4 rubber bands crossing over each other to be safe it also helps with the vibration. I always attach the camera with a length of elastic through the small loop hole near the memory card and securely fasten this to the fuselage so if you have a hard landing and the Velcro comes loose you wont lose the camera.

[moviesunrated]

Thanks! I have the camera now, I cant wait to use it, but the problem is, is i want to test it on a basic plane first, and it only comes with one Velcro sheet to stick on the plane, do you think it's a good idea to seletape it temporarily?