How to start a nitro engine
Loading...
Link to this comment:
Uploader Comments (Darksiderginger)
All Comments (9)
-
@Darksiderginger Hopefully thats the answer or opening idle gap :D i'll make sure to tell you :)
-
@HallyVids: Yea thats sounds weird =S, what % nitro do u use?. And all i can think of to help u is to open ur idle to about 2mm that might help the car keep running.
-
@Darksiderginger It idles for round about 5 seconds without the glow plug ignitor. And the glow plug is fine. The idle screw is set to a 1mm gap? I'm really confused ?
-
@HallyVids: Hey there, there are alot of things that can cause your engine to do this. Does your engine idle without the glow plug igniter connected to the glow plug when your engine stalls? because u might just need a new glow plug. Also is your engines idle screw set properly? in my video if you listen to the sound of my engine you can tell it doesn't sound right because the idle screw isnt open enough, this is my old engine it kept stalling on me because of that.
-
Hi
My engine stalls after about 5 seconds or so of idling ? Why. Please Reply
5:10
A beginners guide to nitro RC part 4: How to start and stop a nitro engine.by stinkymlinky12,683 views- 4:43
Nitrorcx Guide: How to Clean the Carburetorby nitrorcx30,465 views
- 2:36
How to start a nitro engine.by nitrodudez091,749 views
- 1:47
Easy Nitro Engine Startby AirAgeMedia176,701 views
- 6:47
how to clean your nitro engine without using cow rc or alcoholby traxxasrc124,483 views
- 1:34
How to Start a Nitro Engine Using a Drill-Starterby jthornley1210,407 views
- 9:58
Carburetor Cleaningby flyscooters156,630 views
- 6:41
How to disassemble a Nitro Engine!!! (TRX 2.5)by nitromad4829,540 views
- 5:07
ACME Monster T - How to break in the nitro engineby jthornley121,275 views
- 2:13
How to Start a Nitro Engineby jthornley123,108 views
- 10:42
(LOKO MIX) DJ BL3NDby XxCrazyn3ssxX3,475,184 views
- 2:03
Rc truck crashes with wall !! - ouch!by betofede33,293 views
- 0:22
Jump rc truck Crashby jojonathanjo6,901 views
- 7:34
Tips for getting your Nitro engine to start easilyby jthornley1247,667 views
- 2:03
Rc nitro Cen racing MT spec 3.0by Darksiderginger384 views
- 1:45
New Nitro Enigneby Darksiderginger59 views
- 4:20
Breaking in Nitro engines made easyby alishanmao93,566 views
- 8:13
Kyosho DBX VE unboxing brushlessby NSX061632,821 views
- 3:54
Katy Perry - Fireworkby KatyPerryVEVO275,435,197 views
- 1:39
LEGO 8041 power functionby sunmint110,779 views
I think you need to learn how to start your remote with two pulls. than you can show people how to start engines.
coldbeercan1 1 year ago
@coldbeercan1: i flooded the engine alittle when priming it. I can start a engine perfectly fine.
Darksiderginger 1 year ago
I'm using 16% but im moving up to 20% i will try the extra mm gap. :D thanks
HallyVids 1 year ago
@HallyVids: Yea 20 % is a good nitro to use n no problem tell me how it goes =)
Darksiderginger 1 year ago