ESC 60A on board BEC connection
Loading...
Loading...
12,983
Loading...
Link to this comment:
Share to:
Uploader Comments (MrArrow1961)
see all
All Comments (11)
-
@poitka80 Haha. sorry im horible on detail. I origionaly wanted to know if a servo could be pluged into the same channel as the esc. I want the servo to power the mechanical disc brake. My theory here is because the servo will use less energy to stop the truck than if I used the brakes that the esc has. Also im gona disable brakes and reverse on the esc. All this to save some batery i guess
-
@angrygunsmith -yes, 100% delivery on 5 years
-
Yes, they are cheat and have good quality.Why shall I buy expencive 1 motor insted of almost same quality 3-4 ones?:)
Loading...
- 2:25
Using the ESC programming card from Hobbypartzby jefferydonkeith13,205 views
- 2:23
Brushed vs. Brushless Motorby Pofke13LT72,878 views
- 9:58
ESC speed controller setup and connectionsby ryeates344,691 views
- 0:27
[RC] Twin 4.5" EDF test 1by digitalcomplex30,954 views
- 3:59
How to Program your Eflite ESCby DLPlanes7,360 views
- 0:39
Mystery 60A Out-BEC Brushless Motors Speed Controller ESC Yellow from Dinodirect.comby dinovideo1api14,507 views
- 5:53
Arduino + Brushless + escby nicolasgavlak3,127 views
- 0:39
Mystery 30A BEC Brushless Speed Controller (Blue Series) Normal startupby modulofly7,824 views
- 3:59
To BEC or Not to BECby sigepjoker3,575 views
- 1:07
World's smallest and lightest foldable electric Scooterby iulian207218,703 views
- 5:55
Connecting your RC components, a basic guideby OpticFlare15,582 views
- 2:17
RC Servo Switcherby simoninns10,683 views
- 8:51
RC Motor and ESC Wiring - Part 1by 2BrothersHobby36,617 views
- 1:01
Smoking a Turnigy C35-30 - 1400kv Bell Motorby therealheavyj31,661 views
- 1:26
Mystery ESC BEC without RCby savelkaunas1,938 views
- 6:16
Electric Motor & Wiring Diagramby ADPTraining108,750 views
- 1:23
Hobbywing new Turbo Versionby hongkongseeker5,228 views
- 2:11
Brushless ESC setupby rcspeedpassion17,988 views
- 1:58
Disable red wire on ESC for external BEC installby h2oman2103,196 views
Stock... it was nitro and came with disk brakes when i used reverse throttle. I dont want electric brakes, or reverse. I just want brushless to make her go---. and the stock disk brakes to stop.?
poitka80 5 months ago
@poitka80 I just want brushless to make her go---. and the stock disk brakes to stop.?
Dear Sir, I need to understand in details what you are going to do with brushless, There are many questions, sorry. For such tech solution advice I need to see all mech. drawings, shaft load etc
I don’t think that brushless motors are able to become mech.brake motors as far as they have reverse communication with ESC and very sharp timing issue to signal about it’s turning sequence.
MrArrow1961 5 months ago
If something will not go in normal way ESC cutting the 3 phase signal sequence and stopping motor not in the good position for ESC. ESC and Motor will become very hot if such auto cut will happen.
MrArrow1961 5 months ago
Is it posible or bad to connect my esc and a servo to the throttle channel at the same time?? Reason being- I want to convert an old nitro truck to brushless but still use the mechanical brakes?
poitka80 5 months ago
@poitka80 from the same any channel of any Rx can be conneted 2 servos, no matter it is servo+ESC or servo +servo or ESC+ESC but, I did not understand what is the mechanical brakes?
MrArrow1961 5 months ago
What MOSFETs is there on that ESC, with thte cover off you must be able to see them clearly......
pat60606 1 year ago
@pat60606 , I am sorry but heatseank already on it and I am not able to see P/N
MrArrow1961 1 year ago