VY Maloo Exhaust and little Burnout

Just a warm start and idle of the VY Maloo... A little rev, a bigger rev, and then a small burnout...
Car ran to 7000rpm in first, hit second then I backed off... Quite quick smoke build up which was cool... Will have to fire it up for a bigger effort another day.
Perhaps with a camera that has better audio recording as the exhaust noise overpowered the Mic on the camera (phone - nokia 6120)... Oh well... Sounds good still :)

CAR SPECS:
2004 VY II Maloo... 5.7L LS1... 4L60E... 3.91 gear... 6000rpm High-Stall... Pac 918 Valve Springs... Mafless Tune... Alloy OTR... Pacemaker 1-5/8" Ceramic Coated Tri-Y's... Stainless Cats... Twin 2.5" Sureflo "Medium" exhaust with rear resonators removed... 25% UDP... 80mm TB...
Stock cam, stock heads, stock inlet manifold... stock bottom end...

Category:

Autos & Vehicles

Tags:

• VY
• Maloo
• HSV
• Exhaust
• Sureflo
• Burnout
• Shed
• Hoist
• Torque
• Converter
• High
• Stall
• Extractors
• 2.5
• Twin
• System
• Bolt-On
• Unopened
• LS1
• Horsepower
• Skid
• Loud
• 4L60E
• OTR
• Mafless

[tobyhewzie]

aww jelous got ur own hoist and everything! sounds good man.

[dwaynE2099]

@tobyhewzie hey thanks mate... it's dad's hoist, but it's mighty handy!

[xbox4lyfe]

your lucky she dident go sideways and hit the hoist

[dwaynE2099]

yes, good point... but no... generally it sits as straight as when doing a little foot-on like this... if the ground is uneven though it'll walk pretty quickly off to one side... :)

[bindaddy]

Sounds good mate!

What power are you getting out of it with those mods?

[dwaynE2099]

thanks mate...

it only ran 228rwkw when i had it on the dyno last. but that was over two years ago when the only mods were OTR, full exhaust and Mafless tune... since then the rest of the work has been done, so maybe 235 - 240rwkw?

it ran 12.136 with this mod list.

just the other week since changing the cam (but changing nothing else) it ran 11.735... cam is a GMM TK 237/242

[rackupfux]

nice gloves

[keithjackson302]

Awwww dad must be so proud!!

[RuneScapeRocksMySock]

Farrkk that is nice! keep it up!

[Danielhsv0]

Just wanted to say your really nice keep doin ya drag vids