1979 Monte Carlo incar video...Jerico 4 speed wheelstand
Loading...
Link to this comment:
Uploader Comments (4speed71)
All Comments (16)
-
What suspension work do you have done you've car? I am having a little trouble with traction. I'm running 9x28 Hoosier slicks. Do you have an aluminum flywheel? It rather sounds like it. I have a Richmond 5-speed, just in the 11's however not as fast. Any pointers would be great. I have 90/10 fronts and 50/50 rears, I also have tubular lowers and adjustable uppers. Soon to be a drag race anti-roll bar as well. I need new upper bushings, what would you suggest?
-
its funny seein the stock column with the shifter in park,, while this car is haulin ass
-
sweet run
-
who said a 408 cant rev,awsome dude
-
You'd run a lot faster if you would fix your instant center
-
what you got for internals? fully forged? what cam? sorry i got a 79 monte too and i just started building a 406 for it.
-
I have big block springs but I don't know the rate. I was planning on getting 90/10 shocks for the front soon...the slicks made a world of difference. It hooks pretty good now but I still need to work with it a little bit. Check my videos out and see what else you think I could do. It pulls the wheels now :)
-
what kind of front shocks/springs? some adjustable front drag shocks go a long way. pair them with some trick springs and a true slick, it should hook pretty good once set up right. the g body suspension is pretty much identical to your car, so you should be able to achieve similiar results.
-
Meh... My Mustang can do that. I just don't like to show off. :P Just kidding. This vid is still fun to watch a year later.
-
I know you are a G-body and all...but how are you getting such good traction? I have a 4-speed in my 1965 Chevelle and I need traction with a 9" tire. Please Help! I have about 640hp with a big block and I will have slicks
1:1479 Monte Carlo Clutchless G-Force GF5R Wheelie ...by 4speed711,760 views
- 1:03Jerico DR4 on the street...Video 1by 4speed715,576 views
- 1:05Jerico DR4 on the street...Video 2by 4speed712,397 views
- 1:05SBC Jerico DR4 4 speed 9 second Camaroby StrokerAspen5,901 views
- 0:4270 Chevelle BBC 5 spd doug nashby TunedPort3353,431 views
- 1:10Kenny Hubbard Testing on 8.5 No Bar'sby nitrovideoo33,185 views
- 0:37Jericho 941/Baby Eagle High Speedby Gunman846,036 views
- 1:07Chevrolet Monte Carlo 1979 (lowrider)by 98868651425,618 views
- 1:031979 Monte Carlo Jerico 4 speed Cordova Dragstr...by 4speed715,722 views
- 0:58Randy Shift Jericho 4speedby 72POS15,469 views
- 0:301979 monte carlo 355 four bolt comp cam 280Hby Flandersfinest22,455 views
- 1:24Robert McCorkle shifting a 4-speedby Robertm1154313,139 views
- 3:04Chevrolet Monte Carlo 5.7l V8 running on Flowma...by muscle198324,014 views
- 2:29Gear Jammer In Car at Farmingtonby jds9534,477 views
What clutch do you run ????
DaBlueOvalBoys 3 years ago
A RAM Single disk sintered iron setup. Very cheap and easy to use. RAM pressure plate is adjustable with a 800 pound base pressure. Normally run 900-1000 pounds of pressure.
4speed71 3 years ago
Yes....gas pedal never leaves the floor, light tap on the clutch pedal on each shift.
4speed71 3 years ago 2