12-Mounting the Aileron Servos - Building HZ Super Cub from Scratch

A series of videos of how to scratch build your HZ Super Cub. In these videos I'll show you how to do simple mods to strengthen the stock equipment, add lipos, ailerons, electronics and cover your plane.

This is a multi-part video - Installing the Aileron Servos.

Listed below is a series of videos on Scratch building a Super Cub. Click on one of the links to view the tutorial.

Part 1 - Modifying the Fuselage (BatterBox)
http://uk.youtube.com/watch?v=BjtM_faxRu4

Part 2 - Modifying the Fuselage (Wing Saddle)
http://uk.youtube.com/watch?v=pWN0nQwW3sE

Part 3 - Covering the Fuselage Part 1
http://uk.youtube.com/watch?v=2wb5YPuYoeA

Part 4 - Covering the Fuselage Part 2
http://uk.youtube.com/watch?v=3uDvmropio4

Part 5 - Cutting out the Ailerons Part 1
http://uk.youtube.com/watch?v=uRYb6Ta8zhE

Part 6 - Cutting out the Ailerons Part 2
http://uk.youtube.com/watch?v=cNtFguDVmDE

Part 7 - Covering the Ailerons
http://uk.youtube.com/watch?v=CePQYPLQAzo

Part 8 - Covering the Wing - Bottom
http://uk.youtube.com/watch?v=s3ajSwWuVU8

Part 9 - Covering the Wing - Top
http://uk.youtube.com/watch?v=Q6ihrh_3Bxs

Part 10 - Mounting the Ailerons Part 1
http://uk.youtube.com/watch?v=jR5f4OlQmHQ

Part 11 - Mounting the Ailerons Part 2
http://uk.youtube.com/watch?v=dd0xDFaIldc

Part 12 - Installing the Ailerons Servos
http://uk.youtube.com/watch?v=YaC1x53JIF0

Part 13 - Installing the Aileron Control Horns
http://uk.youtube.com/watch?v=YaC1x53JIF0

Part 14 - Installing Can Motor & Battery Box Mods
http://uk.youtube.com/watch?v=gM6LUL5KeoU

Part 15 - Installing the Electronics
http://uk.youtube.com/watch?v=prRsnlzSIyI

Part 16 - Modifying the Landing Gear Part 1
http://uk.youtube.com/watch?v=jQLRvfFHWgY

Part 17 - Modifying the Landing Gear Part 2
http://uk.youtube.com/watch?v=WkdPmUWOojs

Part 18 - Adding & Making Custom Decals
http://uk.youtube.com/watch?v=vj_sT1fq7-0

Part 19 - Finding COG & Balancing the Plane
http://uk.youtube.com/watch?v=kq2VeC9-n9Q

Part 20 - Adjusting & Centering the Ailerons
http://uk.youtube.com/watch?v=CWj8DZvGyjQ

Category:

Education

Tags:

• Hobbyzone
• Super
• Cub
• Modifying
• Adding
• Wing
• Servos

[leviterande]

I am really having a hard time inststalling servos, I use glue gun and it is really seems to be wrong and messy..

[NeCubFlyer]

Hot glue gun? Unless you'r using the low temp sticks, it might melt the foam from the heat! I usually use white latex caulk or silicone.

[rcsmithsam99]

hi, im planning on adding ailerons onto my supercub, but wat reciever do you need to add the servos for the ailerons

thank m8

[NeCubFlyer]

Any 4 to 6 channel receiver will work. 6 channel is better so you can adjust the ailerons independently.

[RCSuperPowers]

Really good and very helpful, nice work! Thanks for sharing for others to benefit.

[carr869]

This is just what I needed to see. I am starting my first build ever. How do you setup the servos in the TX? I'm using DX6i for my heli's and will be using that for my plane. Thank you for the video.

Tom

[peterbehler]

looks like I'll have to replace the transmitter and the receiver from the stock version. Any references to some cheap/beginner stuff.

[mry0so09]

what kind of servo do you use?.. i was planning to do a mod of my super cub too..