focusattack.com Paewang PS3+360 Arcade stick Installation Guide

This video will show you how to wire a dual modded arcade stick using the Paewang PS3+360 PCB in a blank arcade stick case. Create and wire your own custom dual-modded arcade stick on both PS3 and 360 today!

Order Paewang and a 16-piece wiring QD set here:
http://www.focusattack.com/paewang/
http://www.focusattack.com/16pc-wire-with-110-quick-disconnect/

Useful diagrams:
http://i22.photobucket.com/albums/b305/letage/PW_PCB_B-500x500.jpg
http://etokki.com/image/cache/data/paewangrevolutionpcb-500x500.jpg
http://i730.photobucket.com/albums/ww301/rtdzign/Misc/JoystickWiringGuide.jpg

Category:

Howto & Style

Tags:

• focusattack.com
• focusattack
• focus
• attack
• dual
• mod
• Official
• Stick
• Arcade
• Arcade Game
• Arcade Stick
• Mod (video Gaming)
• Video Game
• how
• to
• nerrage
• jmanDMC
• Install
• soldering
• Street
• fighter
• Street Fighter
• Playstation 3
• Dual modded
• Dual
• modded
• arcade
• stick

[TeamUnholyTriforce]

if i wanted to build a stick, how could i make my PCB look like a Madcatz PCB where it has prongs sticking out of the PCB so i wouldn't have to solder the QD to the PCB?

[nerrage]

@TeamUnholyTriforce There's pretty much no way to not solder, short of someone else doing it for you. There is the eTokki harness, but that still requires soldering.

[UltimaWeapon08]

I'm using an HRAP3 for this dual mod. I'm new, so here's a few questions. The HRAP3 comes with a wire harness for sanwa sticks but I stopped using my HRAP3 due to me holding down and my character not crouching. Should I buy a new wire harness? Should I buy 20 quick disconnects for this project since I'm using an HRAP 3? Also, I got a sanwa jlf stick in the mail, but I want to remove the mounting plate since the HRAP3 comes with one already. What screwdriver do I use to remove it? lol

[nerrage]

@UltimaWeapon08 The wire harness could have been the cause, but it may have been other things, such as your joystick. You can try to re-use that one, but, it may not work. I don't think it was the harness, but if it had been damaged, yeah, that can happen.

The Screwdriver you need to remove it is a JIS screwdriver. Looks like a phillips head. Not worth swapping out.

20 QD sets will wire 10 buttons. If you plan on using 10 buttons, get 20.

[jellgeta]

I have a few of these, but one of them won't register when I plug it into my computer. Would you know of what might cause this issue?

[IntoTheMeatGrinder]

@nerrage awesome, thanks a lot!

[nerrage]

@IntoTheMeatGrinder Connect a Ground to the Ground on the 360 Turbo panel. Just solder a wire to it. Then, connect a wire from XGUILD to Guide, and Turbo will be right below it, connect that to the Turbo signal wire from the paewang.

See this image for reference farm5.static.flickr (dot) com/4003/4356371055_1b5bd71916­.jpg

[IntoTheMeatGrinder]

@nerrage i have a 360 te-s

[nerrage]

@TRAGICbliss I usually do cleaner, but I was considering the level of the installer, since, most noobies will make a mess. I usually use zip ties, TechFlex and HeatShrink tubing, and I typically crimp my own Open barrel QDs for a clean look. But that would have been a needless waste of time for the person who just wants to get their stick working.

However, in the future, I will have a "clean wiring" video.

[nerrage]

@IntoTheMeatGrinder Depends if you're using a PS3 or 360 TE. PS3 is a bit harder, but it's doable. 360 isn't terribly difficult.

[nerrage]

@michaelmudrick Great PCB. The USB cord is a little short, IMO, but you can solder on a new one, if you want. It is glued and soldered in place, so it's pretty resilient, but like any USB, it can be damaged.

[nerrage]

@Davidmakesbeats8 They're not ripped out from anything. FA orders the PCBs directly from JoyTron. The similarities occur because if you look at the sticks, they're almost identical. EightArc Fusion sticks use a different PCB than the Paewang.