Rebote 2.5 Delay echo guitar effect Demo, I built it

http://www.fillmorepedal.com The other day I built a heavily modified Rebote 2.5 Digital Delay guitar effects pedal. Here is a demo of it, I hope you like it. This is not your average echo pedal for guitar. The plans are available at www.tonepad.com I recorded it direct into the Yamaha AW1600 using clean sound, no other effects or EQ but an AMZ compressor after the echo, so you can really hear what this echo does. It can handle a lot of other "normal" echo effects too, like a rockabilly slapback echo, but I wanted to show off the insane side of the Rebote 2.5. I modded the filtering on it to my own taste so it passes more of the highs and upper midrange, I think it sounds clearer less muddy than the stock; also increased the maximum delay possible, and did the unlimited echos mod. The modded filtering really cleans up the sound when you use "unlimited repeats". I will be recording songs with it soon but for now I am just noodling around with it to explore the limits of this fine echo pedal.

Just for the record I played my 1974 Electra Les Paul "Super Rock" guitar on this clip. If you watch some of my other clips like Stormy Tuesday Blues (Final remix) you will see pictures of this beautiful guitar. It recorded direct into the Yamaha AW1600 at an audio depth of 24 bits and mixed down to 24 bits stereo, then I converted it to 16 bit stereo to make this YouTube video.
If you have a high speed Internet connection you may be able to hear this clip with better audio quality by using this URL instead (note the &fmt=18 at the end):

http://www.youtube.com/watch?v=Y7RHSecplZk&fmt=18

Category:

Music

Tags:

• Rock
• R&B
• Rebote
• Echo
• Delay
• demo
• Tonepad
• DIY
• Electra
• Super
• Les
• Paul
• guitar
• effect
• effects
• FX
• Yamaha
• AW1600
• Norcott
• wnorcott

[monkeyxx]

incredible...thank you

[wnorcott]

@monkeyxx Thanks Brother, glad ya like it! Thanks for listening.

Bill

[100roberthenry]

whats the longest delay time on this?......

[wnorcott]

It can get about a half-second of delay or a bit more.

Bill

[yuriharrison]

Thanks, Your delay is amazing.

;)

[killitb]

Using your mods, I got my rebote sounding sooooooo smooth.

MANY THANKS TO THIS MAN RIGHT HERE

[Walls1441]

@Walls1441

I don't have an oscilloscope but as far as i can tell the opamp is working (the first stage definitely works but trying to test the second one overpowers my multimeter's shitty AC function. I've tried like 3 different TL072s so i doubt all of them have an absurdly out of range SNR. No leads are touching, i really can't figure this out. True bypass works just fine. no led or anything

[Walls1441]

built this pedal and for some reason i can't get it to work. If i turn the repeats all the way up it oscillates with the delay knob [so the big IC is working], but it just seems like the signal isn't making it all the way through. I've tested every solder point and the connected ones. Double checked all resistors and caps. Voltage regular is function properly. part 2 coming

[Walls1441]

@mendebil you can connect two wires to a dpdt switch then on one side place the 10k (for infinite) and 15k on the other (regular version) then stomp on the switch to change between. Or you could connect one lead of the 10k resistor and connect the other lead to a 5k pot and have a similar effect.

[mendebil]

@BlisteredBones don't you have to replace a resistor to get infinite delay?

[MrBatch73]

At 1:14 I went to another time and era, amazing sound. Well Met Sir!

[wnorcott]

Yes check out my link in the more info section I actually have a company that sells pedals that I designed. Check out my channel page wnorcott too.

Bill