Upper Control Arm Bushings Honda Accord 96.mov
Loading...
Loading...
12,218
Loading...
1:06
How to do a wheel alignment perfectly without scratching your wheels Tru Alignby hellotime940,616 views- 0:34
Bad control arm bushing? Clicking sound. Volvo S80by macplee19,118 views
- 1:31
lower ball joint replacementby johnpadvaiskas56,377 views
- 2:30
Removal of diff bushing with no tool.3gpby flipfinish9,937 views
- 0:21
Popping Noise from Strutby bqluong47,980 views
- 2:49
How i made a bushing press toolby Jdmdecals19,745 views
- 14:16
How to Install Camber Kitsby chefigo59,147 views
- 0:49
Bushing Removal Without Smokeby MX5hyde25,276 views
- 0:25
how to remove a bushingby Seisephiroth41,981 views
- 2:48
Rubber control arm bushing replacement overviewby elephantracing71,176 views
- 0:29
VERY BAD Ball Joints - WATCH THIS!!!by haglinautomotive186,692 views
- 5:44
Jeep JK Ball Joint Installation - Part 2 of 2 Installby JeepSWAG10,127 views
- 3:21
2011 Camaro - Pressing Out Upper Control Arm Bushingby camaromodz5,020 views
- 29 videos94-97 Honda Accord (How To)
- 0:22
Redneck bushing pressby bassoonisbetter8,542 views
- 5:54
Upper and Lower Rear Control Trailing Arm Bushing Removal and Installation BMW 325i e46by edzgarage24,201 views
- 0:15
Bad lower control arm bushing on a Honda Civicby phasm4228,290 views
- 0:06
Front Lower Control Arm Bushingby iametarq30,711 views
- 2:53
Lower Control Arm Toolby richpowerhk79,600 views
- 3:44
Knowledge Base: Front Camber Kitsby Skunk2dotcom5,425 views
- 3:52
Homemade Press Brake for Harbor Freight 20 Ton Shop Pressby jdh23914,668 views
The cap was a 1 1/4"in galvanized cap. I drilled a hole through it and placed a threaded screw with a nut inside to secure it. The other piece is the 1 1/4" x 4" galvanized steel pipe nipple.(i cut it in half) I bought both at Lowe's . The driver sleeve is a 3/4" galvanized coupling ground down to it's smooth surface. I was going to make a video of how i made the jig but never got to it. Thanks for watching hope it helps. The polyurethane bushings do squeak a bit so be prepared for it.
sexymd39 1 year ago