Alphacool Laing DDC Ausgleichsbehälter (Reservoir) und Aufsatz Combo Rev. 2

This kit contains the popular Alphacool Laing DDC Plexi top (Item No. 52033) and the new Alphacool Laing DDC reservoir rev.2 for the Laing top.

This kit is cheaper than individual purchases!


This reservoir is designed to replace the standard top on the Laing DDC pump to allow use of G1/4" fittings and improved performance. With the help of decoupling kits (see decoupling section) the Laing can be installed completely decoupled on the case floor, alternatively it can be installed in a 3,5" bay or even instead of a 80mm fan. With this top all imaginable positions are possible, no more limits for your projects! The top also has 5mm LED holes for case modders.
A further opening is integrated for use of the optionally available reservoir (included in this kit!). With the use of this reservoir this top can be used as a reservoir and additionally allows all the mounting possibilities!

Technical specifications:
Dimensions (LxWxH): 80 x 80 x 70mm (without fittings, without pump)
Weight: 180g
Material: Röhm Plexiglas GS
Mounting: 8x decoupler sockets, 4x M4 threads
Connection threads: 3x G1/4" threads

Extent of delivery:
1x Laing Plexi top
Stainless screw M4x25
Screw plug G1/4"




Alphacool Laing DDC reservoir Rev.2:

The Alphacool Laing DDC reservoir Rev.2 is another module for expansion and improvement of the Laing DDC-1T and Laing DDC-1Plus pumps. The basis for this module is a pump which is already equipped with an Alphacool Laing top. This unit can be equipped with a reservoir quickly and easily. Simply put the reservoir onto the top with the included gasket in place, tighten the 4 screws in the corners and you are set to go!

The material of this reservoir is Plexiglas, which has proven to be popular and handy in the watercooling sector for years. Colourful coolant can be used to accentuate the reservoir, especially in combination with a LED in the pre-drilled LED hole of the reservoir.

The technology of the Alphacool Laing DDC reservoir Rev.2 ha not changed much, as it still is what its predecessor was: Ahead of the time! The concept has proven itself for years and has shown that it is truly matured. Now, being slightly modified optically it comes along to be even more attractive!
Practicality was of course a factor which was considered when implementing G1/4" threads for maximum possibility. The 1 Inch level indicator on top of the reservoir ensures a safe seal and great appearance.

Of course all the advantages of the Alphacool Laing top, such as the drive bay mounting, are still available when using this expansion!
Compact, in a new look and with proven technology, the new Alphacool Laing DDC reservoir Rev.2!

Technical specifications:
Dimensions (LxWxH): 80 x 80 x 40mm (without fittings, without pump)
Weight: 180g
Material: Röhm Plexiglas GS
Connection thread size: ¼ Inch
level indicator thread size: 1 inch
Capacity: 110ml

Extent of delivery:
1x Alphacool Laing DDC reservoir Rev. 2
1x Gasket
1x Level indicator with gasket
1x Mounting screws

Please note: The "Alphacool Laing DDC reservoir and top combo Rev.2" is shipped in parts and without a pump!

Ein Set bestehend aus dem beliebten Alphacool Laing DDC Plexi Aufsatz (Artikelnummer: 52033) und dem neuen Alphacool Laing DDC Ausgleichsbehälter Rev. 2 einzeln für Laing-Aufsatz (Artikelnummer: 52173).

Dieses Set ist günstiger als der Einzelkauf!




Zum Alphacool Laing DDC Plexi Aufsatz:
Dieser Aufsatz ist so designed, das Sie die den herkömmlichen Deckel der Laing DDC Pumpe gegen den neuen austauschen können, und Ihnen somit G1/4"-Anschlüsse zur Verfügung stehen. Mit Hilfe von Entkopplungssets (Rubrik Pumpenentkopplung), kann die Laing komplett entkoppelt in 3,5"-Schächte eingebaut werden, bzw. am Boden, mit Hilfe von Standardentkopplungen, am Boden befestigt werden, oder besser anstelle von 80mm Fans eingebaut werden. Mit dem Aufsatz sind alle erdenklichen Postionen machbar, bei Ihren Projekten sind nun keine Grenzen gesetzt. Der Aufsatz besitzt auch 5mm LED Bohrungen für Case-Modder. Eine weitere Öffnung ist für den optional erhältlichen Ausgleichsbehälter vorgesehen. Der Aufsatz kann mit Hilfe des Ausgleichsbehälteraufsatzes zum kompletten Ausgleichsbehälter umfunktioniert werden, weiterhin stehen dann auch alle Entkopplungen zur Verfügung.

Category:

Science & Technology

Tags:

• Alphacool
• Laing
• Pumpe
• Watercooling
• bundymania
• DDC
• Top

[MrWiglips]

im thinking about this res top. how well does it bleed/purge the air out?

thanks