Spark Gap TPU

No description available.

Category:

Science & Technology

Tags:

• TPU
• Spark
• Gap

[morpher44]

question: what are those weird blinking lights in plastic tray above yellow clip-lead @ 1:28?

[stprue]

@morpher44

Behind the try is a window and those were car lights.

[giantkilleroverunity]

Measure the output of the little bridge from the CFL driver. It should read close to what your meter says. The RMS value of the ac.

[stprue]

@giantkilleroverunity

Yes it is close.

[Magluvin]

Is this an air core transformer?

Magluvin

[stprue]

@Magluvin

Yes it is an air coil PVC Smith type TPU

[onthecuttingedge2005]

build 1 TPU tank circuit for strictly voltage, build a second TPU circuit for strictly amps then merge the two tank circuits together to produce better watts. join the 2 circuits via a one way diode on each line for both tanks.. using 2 separate tank circuits allows you to hook up an electrical amplifier circuit as well.

[coldarc]

steven mark used permanent magnets.

[dsands47]

If I'm correct - setting up the circuit to fire first the upper, middle then lower horizontal coils, with the current running in the counter clockwise direction , should increase power output, creating a counter clockwise torsion field that is theoretically in phase with the the Earth's gravity field.

[dsands47]

Stpure -

Figured it out. You have 3 horizontal windings each in their own PVC. One on top of each other. Firing the bottom, middle then upper from the CFL driver. Now to invert it and run my house. No more electric bills. :-)

[dsands47]

Stprue -

Are the 3 horizontal windings under the last vertical winding wound on top of each other and you're firing them at 120 degree phase from each other or are they 3 winding each in their own pvc tube, one on top of each other or are the 3 winding only wound each within 120 degrees of the torid arc ??

[Magluvin]

Very interesting. I was guessing from some conclusions that I have come to recently. Thanks for the reply. =]

Magluvin