DIY 69 - New bedroom cont'd - framing stage - ceiling joists up and ready for ridge beam

A ongoing chronology of work I've done myself around the house. Learned a lot online from others so maybe someone else like me will be interested in seeing how it went for me. It all started about the year 2000. If it's available, watch in high quality. These were old analog tapes recoded to digital. Sometimes it's available - other times it's not - I think youtube is still working on it.

Category:

Howto & Style

Tags:

• diy
• do
• it
• yourself
• home
• improvement
• how
• to
• construction
• renovation
• addition
• carpentry
• framing
• sheetrock
• plumbing
• electrical
• foundation

[d1incharge]

There is no need for that many bridging blocks, how long before you realized your joist need cuts at each end or they will stick out into the roof?

[shorecat99]

I did the bridging blocks to have a surface to screw the ends of the sheetrock to. I used 4x8 sheets. And I knew the joist ends needed to be cut. I just chose to cut them after they were in place. Whatever, my first time, you know... we don't all choose the same paths to the end. Maybe next time I'll cut them first??

[rubberstarlet]

hmm is that standard for most ceiling joists? are they 16in apart or so?

[shorecat99]

yes, they are 16" apart on center.

[friscoamm]

Thanks for spending so much time showing us your old roof and front yard. I was REALLY interested in that.

[vlineguy]

very nice frame job,you can tell you have quality in mind, every thing is straight,

hope you got some help in parts of the heavy lifting, if you do more framing try putting your top plate on before you raise the wall, and if you think about it go ahead and lay it out too, saves a lot of time ( but you probably already know that, )good luck in all your project's Al

[vlineguy]

very nice frame job,you can tell you have quality in mind, every thing is straight,

hope you got some help in parts of the heavy lifting, if you do more framing try putting your top plate on before you raise the wall, and if you think about it go ahead and lay it out too, saves a lot of time ( but you probably already know that, )good luck in all your project's Al