40mm Pneumatic Airsoft Rocket Launcher

Simple Homemade cannon and I shoot one of my friends with it!

Category:

Comedy

Tags:

• Airsoft
• Cannon
• Rocket
• Launcher
• Pneumatic

[BenSTA09]

what kind of range u getting off a 100 psi

[RICEKING212]

I was able to shot a solid round about 200ft straight up.

[ch0k1ngh4z4rd]

Hey, what PSI rating is that PVC?

I'm gonna build about four of these. :D

[RICEKING212]

It all depends on the size. The smaller pvc pipes like .5in pipes have a high psi rating of like 300 or maybe more. As you go up in size, the psi rating is less. I wouldn't trust the rating though. The psi rating is printed on the side of the pipe and i would minus about 200psi of of what the pipe says. Then you can be a little safe.

[at400andromada]

Best cheap homemade so far! I like it, keep it up :)

[NUKEUM24]

do those bags of bbs get a good blast radius?

[AwsomeSauseForMe]

@TheFrozenMovie, Did you use PVC cement?

[TheFrozenMovie]

Hey I made this but eventually the air just started leaking out after I pumped it to about 60psi. What do you do to keep the air from leaking? I'm somewhat inexperienced with pneumatic things, so put it simple terms for me please. Thanks!

[crazymonkey1192]

first off it was the middle of the night, second off, my girlfriend was out of town, and finally, my friend was borrowing my X-Box, so no playing Halo for me. So it's not "Nerd Patrolling" it IS troll patrolling, and I forgot the number one rule of online message boards: "Do not reply to trolls, it's what they want" and if you do feel the need to argue this further, please use private message instead, it keeps us from annoying others. :FACEPALM: GAWD I am retarded, I replyed to you again!

[hansthekraut]

@crazymonkey1192 nerd patrolling, if "troll patrolling is what you do when you get bored, then you honestly need a life.

[minibikerider1]

@RICEKING212 never go to that rating i would go about 30-40psi less than the weakest part is rated to like on mine with a .5in pvc ball valve it is rated to 150psi i would go only to 120psi and test the air tank of the gun with a air compressor when done with it before you fire it and if it works use it 20psi less than that make the air tank 3 times the size of the barrel like 2.5 in and reduce it down to like .50 in pvc you can put a lot down a half in barrel

[crazymonkey1192]

@hansthekraut troll patroling, i got bored, recently commented on an another troll, but really man? double-post trolling?

[Bigkidstudios23]

That's cool man

[hansthekraut]

lame... and, that isnt 100 psi, its prolly like 30, weak