My Magnet Motor Free Energy Study

http://MagnetNerd.com I decided to have a go at designing a permanent magnet motor, not to save the Earth or make a zillion dollars, but to study the so called "Gates" that keeps hundreds of thousands of free energy attempts from being successful. I started with a 5 1/4" by 3/4" thick oak disk. I drilled 2 banks of eight 3/8" holes. In each bank I started with the shallowest hole and drilled the next one 1/16" deeper than the previous hole. The 2 banks of magnets keeps the unit balanced. In these 16 holes I set 3/8" dia by 1" thick Neodymium Magnets. All of these NIBs have north poles facing out. Then I set another 3/8" dia by 1" thick cylinder in a cradle with the North Pole facing out. There is a skateboard ball bearing at the axle. Since I don't want to permanently glue 17 nice NIBs in it so I am using a layer of paper towel to force-fit the magnets snugly in place. It worked just as I expected. The 2 "Gates" are definitely there, but they can be overcome simply by rocking the pushing magnet a little. What would it take to make this design work? First you would have to design a mechanism to rock the pusher twice per revolution. Second, a portion, but not all, of the rotational energy would have to convert to mechanical energy to rock the pushing NIB. Enough rotational energy would have to be left to rotate the disk beyond the gate location where the pusher would drop down and accelerate the disk for 1/3 of a rotation before being rocked again for the 2nd "Gate". Is there enough rotational energy to lift the pusher twice for each revolution? Hell No! Still it was a fun little afternoon project and it is neat to keep it spinning by manually rocking the pusher. But I didn't achieve overunity nor save mankind in a single afternoon. Check out the website.

Category:

Science & Technology

Tags:

• Neodymium
• electric
• motor
• free
• energy
• magnet
• study
• experiment

[OMGyouAREaTWAT]

@Noemitmir Read the description he knows it is not free energy. The video is called "My Magnet Motor Free Energy Study" and the description details his findings. Stop being a moron and read about what you are watching.

[AryanKnight]

FYI: -unfortunately, the laws of physics are such that when the single-magnet is coupled to a mechanism which articulates it, the energy expended defeats the motion of the plural-magnet wheel. However, unlike most of the bull-shooters here, your presentation simply lacks the always missing ingredient, --an effective magflux SHIELD, which would essentially 'block' propagation of flux as though a piece of opaque cardboard blocks the passage of light; --that is what has eluded inventors.!!!

[StupidGoodProduction]

lol the ``gates'' of physics.

[Kallisto87]

I had - independent from your video - EXACTLY the same reflections in my mind and built a machine that looks nearly like yours. I had to laugh when I saw this. :-) Good job!

[ruipx]

Is that hand for free?

[LeGuyIncognito]

Actio and reactio. Energy only can be converted. There's no way to make something like that automatic. You want free energy? Build something that converts Sunlight, or buy a solar panel.

[Deduccion2]

donde esta free energy?? lo mueves con la mano... vaya mierda

[diegofacundouri]

cheat! why not fix the position of the single magnet so that we can see if it is working. what you did is just attract the pole on the right position to rotate the rotor. I can rotate the rotor with just one magnet. scam!

[CJBroesky]

It would be so easy! Take a coat hangar, straighten out the wire. Drill a small hole in the wood wheel beside the center. Bend an L in the coat hangar. Insert the L into the hole and than run that wire to a I hook ontop of that magnet block you move with you hand and put a hinge on the bottom of it! Drill that hole in the wheel so it's in time to push and pull the wire to make that block go up and down.