Uploader Comments (1aauto)
All Comments (14)
-
r u replaceing this because the highbeam is touchy cause mine high beam is really touchy on my vic
-
Holy crap thankyou! my gfs mom sold me an 03 crown vic for 200 and all i had to do was replace this thanks!
-
THANK YOU SOOO MUCH!!!
-
This video was very helpful for me as well. I have a 1999 Town Car, and the only difference was that there are 7mm bolts vs. T20 Torx bolts. I also found it a bit easier to take the top cover of the steering column out as well. This gave me better access to the electrical connectors which are a bit of a pain. This job took about 40 minutes.
-
This video was very helpful for me as well. I have a 1999 Town Car, and the only difference was that there are 7mm bolts where the T20 Torx bolts are in the video. This job took about 40 minutes.
-
I just did this job in under an hour. ( turn signal switch would not cancel, spring broke inside) This is a great video thanks it saved me about $150-$200. The only thing i did different was I took the trim off the steering column first, then took out the ignition cylinder out. I thought it was easier to see the little button you have to push to remove it.
just one question why did u take out the ignintion and why dint u pull that panel on the left next to the steering colum for more room
slednck3 6 days ago
@slednck3 You need to pull the ignition in order to remove the turn signal switch, on this application. The other panel didn't need to be removed.
1aauto 4 days ago
I just ordered a multifunction switch from 1aauto.com i havent recieved it yet but i have watched this video 20times and i cant wait to install it. thanks for this helpful video.
officalTZ 2 months ago
@officalTZ Thank you for your purchase. Our YouTube video will walk you through the entire process. Have a great day!
1aauto 2 months ago
You're welcome.Thank you for checking out our videos.
1aauto 8 months ago