Roblox Hacks: How to do the Phasing Hack! (Walkspeed Hack)

THERE IS STILL A WAY TO DO IT! WITHOUT USING DEBBUGER!~~~~:

Step #1: find the pointer: Do the same thing I do in the vid to find it, when the game shuts down DON'T WORY. Save the pointer anyway.

Step #2: Use the pointer the same way I do in the video except (here's the important part) use it in the game you want to hack in. The game will shut down, but do exactly the same thing I do in the vid and get the address of walkspeed. The game will shut down Donot Delete close the window or delete the address.

Step #3: Find the byte code. This is where you start doing new things. With the window that says the game has been shut down still open, right click the address to walkspeed and click "Browse this memory region". When the new window comes up you will see two sections with addresses on the left side of both sections. The Bottom section will have a bunch of numbers and letters in rows. The top row in the bottom section should have an address on the left that matches the address of the walkspeed. Highlight all of the numbers and letters NEXT to the adress, right click and copy it.

Step #4 Close the window that tells you the game has shut down. Re enter the game. Go to memory view in CE and click Search on the top of the window. Click "Find Memory". In the window that comes up change the address in the box next to "From:" to 0. Past the byte code you copied in step # 3 into the area at the bottom. Make sure you're searching for "(Array of) byte" and click "OK". Right click the bottom section of Memory view (make sure you right click in the area where the byte codes are) and select "Display type" then "Float". If at the top of the bottom section is a non decimal number (it's usually 16) then you've most likely found the address of Walkspeed!
(PLEASE NOTE: you can only do this if your walkspeed is the same as it was when you copied the byte code, and when you search for your walkspeed. If it is not the same, the byte code will not match. Also just incase, if you do everything correctly and donot find walkspeed, search again but change the value in "From" to the address directly after whatever address is at the top of the bottom section of memory view. If you come up with nothing then tough luck :\ )

Step #5 Put the address on the main CE window. Go back to the first window that opens up when you open CE. There is a button on the right half of the window (under the center) that says "Add address manually" Click it and type in the address of walkspeed you found in Step #4.

Step #6. Enjoy. If you die use the same byte code from Step #3 and repeat Steps 4 and 5.

Unfortunatly this proccess only works if your walkspeed does not change untill you have found it.

Here's the List mensioned in the vid:

Walkspeed: Can Do.
17-25: Disguised speed hack. Can be used to have a slight advantage over others in sword/ gun fight games without them realizing your hacking. Also can be used for slight jump increase.

200: Used to go through the thinest of walls. (donot use on death bricks)

250-300: Used for Moderate sized bricks. (still wouldn't trust on death bricks, but could work)

300-500: Used for phasing through Large bricks (adjust acordingly, usable on death bricks)

500-1000: REALLY Long Jumps and HUGE bricks.(Use only if absolutely required)

1000+: Not recomended for use, eventualy they become insta suicide so long as you can move.

FOR PEOPLE WITH QUESTIONS:

#1 The instructions are in the bottom left corner of the video. Please read them as the video goes on...

#2 Follow the instructions while you attempt and pay close attention to them.

#3 Before asking me a question Watch the video at least 3 times. The WHOLE video, not just the parts you think contain the answer you're looking for.

#4 FAQ's Answers-

- WALKSPEED Is a number that controls how fast you move. To "teleport" set your walkspeed HIGH and click a spot near your character.
-"Pointer" is explained in the vid
-You CAN do this hack in ANY place
-The List in the description describes the Walkspeed you should be set to, for the corresponding situation
- WHEN ROBLOX UPDATE YOU MUST UPDATE THE POINTER. Your old pointer becomes invalid.~~~~ sry I forgot to mension this~~~


#5 If you donot understand any of this, please take as much time as you need to watch the video again, before contacting me..

Category:

Gaming

Tags:

• Roblox
• Hacks
• Phasing
• walkspeed
• speed
• cheat
• cheats
• cheatengine
• engine
• how
• to
• do

[TheStingray55]

Whats the whole point of hacking? It just makes it hard for other players and they have to suffer, I will never hack, and we can't even enjoy the game with hackers, people should always report a hacker no matter what!

[HeartlessSora1234]

@TheStingray55 hacking is power. power is something we all want. It's also fun to just figure out new ways to hack. How someone uses a hack is up to them. It's the people who maker it harder for other players not the hacks. You don't have to agree with it, but you can't complain till you know what it's like, and you don't know what it's like till you've tried it.

[Kartekid2233]

Oh and way you put got patched :P

[HeartlessSora1234]

@Kartekid2233 if your going to say that, explain what happens when you try to do it so i can find a way around it -_- don't just say "it's patched"

[MessWithMaLilFRIEND]

Really Love your stuff keep on hacking :D!

[goldyfish123456789]

what song is this?



[IVAN1997526RTY]

patched

[EpicknezzRBLX]

Whats song in beginning?

[azzaz100]

it took me 11 minutes and 16 secounds to notice what game it was

[commanderghost77]

I know how to do another way that is possible today. I won't be showing it though, sorry.

[TECUcom39]

DUDE STOP SPREADING THEM OUT YOU FOOLISH FOOL OF THE UGLEYNEES FOOL OF FOOLS ITS GOING TO GET PACTHED.

[Partyhat99Studios]

moar codes :D