Foam and Resin
Loading...
Link to this comment:
Uploader Comments (herphalfwayhouse)
All Comments (9)
-
Thanks for this, I made my Loki helmet out of foam and was afraid the resin might ruin it.
-
Polystyrene foams will melt or react with any paint or casting materials that contain aromatic solvents,paints such as acrylic,water based and two pack epoxies will not react,paints such as cellulose,xylene and enamels will melt expanded foam and most plastics.As with all paints and materials it's always a good idea to test the materials on each other before use.Fast cure epoxies and epoxies mixed with too much hardner are highly exothermic and the heat can melt and deform low melting point pla
-
It might not have deformed as much with a thinner coat. Just a thought.
-
were do you get your foam and stuff im making a guyver and i know i can get the thick stuff at home depo but what about the thin stuff
-
We have a few small parts to complete before suits are sold. We will have to discuss price but I think around $800.00.
FYI I am Ithica. I am a Member of Soaring Hammer.
-
Cool dome! This is good to know if you are going to resin the foam xD Thank you!
13:40
Polystyrene foam in epoxy resin - heat & chemical reaction testby BigMilanCarbon2,304 views- 10:15
Museum Updateby herphalfwayhouse3,429 views
- 14:44
Mass Effect Armorby herphalfwayhouse6,923 views
- 9:15
Molding Tutorialby herphalfwayhouse1,982 views
- 10:01
Fiberglassing the rear Coupe section - Bailey Blade XTR - Part 48by BaileyBlade19,080 views
- 5:51
Bring Back Your Boat Two Part Poly Foamby BRINGBACKYOURBOAT18,896 views
- 8:44
Props made with Styro-foamby brickintheyard47,153 views
- 6:36
Screw Cap Tutorialby herphalfwayhouse21,946 views
- 9:45
Fiberglassing Balsa Surfaces with CAby SpaceBuckaroo6,985 views
- 8:25
Master Chiefby herphalfwayhouse2,603 views
- 11:35
Cutting foam armor tutorialby jokinghorsepub11,076 views
- 5:32
How to Cut Foam RC Plane Wingsby DynamAero70,066 views
- 6:55
Vinnyby herphalfwayhouse1,106 views
- 9:52
New Reconby herphalfwayhouse1,849 views
- 4:13
Meadowsa sculpted foam design How to build Kit Car Psychopups Meadowsby madgraphx28,418 views
- 9:08
EVA Visorby herphalfwayhouse13,005 views
- 9:04
Recon Suit Updateby herphalfwayhouse10,450 views
- 6:54
How to carve Expanding Foamby Mogrymillian34,415 views
- 10:01
AR Preppedby herphalfwayhouse678 views
Hey Ithica Have you experimented anymore with the resin and foam? A similar question Came up on TheRPF and I remembered this video.
BaconLettucePickles 7 months ago
@BaconLettucePickles Yes it works fine for the thins and the thicker EVA Foam. If you use urethane resin it is better than the aqua resin.
herphalfwayhouse 7 months ago