How To Grease Your Snow Blower Auger
Loading...
Uploader Comments (HDReynoldsGenMdse)
All Comments (11)
-
THANK'S FOR THE INFO!
-
i have gilsons, gilsons use zerks, that's how i grease
-
Many of the new ones out there now which includes all brands do not come with grease fittings an appear to be non greaseable
-
Thank you for your video. I was not even aware of all the maintenance work I had to do (other than oil changes) to my snow blower. I bought it new 2 years ago, and your video is very helpful. Your explanation was very clear. Thanks again for taking the time to make this instructional video. This is what I love about YouTube, people sharing their expertise and knowledge.
-
Thank you....I can't wait till winter!
-
Nice video tell will you be posting more and if so can you do one on aguer repair. Thanks!!
-
@HDReynoldsGenMdse Thank you! i'll go to a Ariens dealer.
10:54
Grease Gun Refill Videoby strykerfamily20,170 views- 4:05
2 Stage vs Single Stage Snow Blowersby AriensChannel103,118 views
- 3:26
How to Adjust the Skid Plates and Scraper on a Two-Stage Snowblowerby eReplacementParts4,170 views
- 5:24
Preparing Your Snow Thrower for Off-Season Storageby MTDProductsInc4,604 views
- 14:11
HOW TO TUNE UP A Snowblowerby smallenginemaster118,389 views
- 1:58
Craftsman Drift Breaker Snowblowerby senecadaze5,262 views
- 7:29
Another little tip for snow blowersby mbyr3124,963 views
- 4:36
Snowblower Maintenance - How To Lube Your Self Propelled Driveby majorxlr8n30,329 views
- 2:43
HOW TO ADJUST & Lubricate Snowblower Chute Control Handleby donyboy738,994 views
- 0:30
Helpful tips on maintaining your snow blower - Ace Hardwareby acehardware1,798 views
- 7:22
Craftsman snow blower $15 !!by Wallabydam12,166 views
- 8:15
REPAIR of The Blown Snowblower Auger Gear Case Part 3 of 4by donyboy739,319 views
- 3:08
How a basic snowblower transmission works.wmvby mbyr3116,373 views
- 3:26
REPAIR of The Blown Snowblower Auger Gear Case Part 4 of 4by donyboy736,826 views
- 2:29
snowblower shoe upgrade: Installing ARMORskids.aviby snowblowerskids9,385 views
- 2:16
HOW TO Replace Shear Bolts on Craftsman, Husqvarna Snowblowersby donyboy738,112 views
- 1:09
How to Keep Your Garage Floor Dry After Snow Blowingby SnowBlowersDirect18,577 views
- 0:31
Friction plate repair, Toro Snowblowerby Tuffgeye3,508 views
- 1:17
how to adjust the friction drive system on a snow blowerby 8tyman810,172 views
Do you recommend a low temperature grease or does a general purpose grease work just fine?
PLM630 3 months ago
@PLM630 Whatever is in your grease gun will be fine. The grease is just to coat the shaft so that the auger doesn't rust up to it. The most important thing is to remove the shear pins and to rotate the auger after you grease it so that the grease coats the whole shaft. Then replace the pins.
HDReynoldsGenMdse 3 months ago
How do you lubricate the gear case (inside that silver thing). i have an older model Ariens ST5+2 and i removed the tap bolt from the gear case and saw some old white grease. i'd like to know what kind of grease/oil should i use. thanks
jerinxd 1 year ago
@jerinxd Originally that would have had Ariens L-2 synthetic gear oil. If you are seeing a white grease, it is probably Ariens Liquid Grease. If you have an Ariens dealer nearby, he should have it. If not you can call us and order it. If you prefer to look for a substitute, the spec on it is "Semi Fluid N.G.L.I. No. 00 Lithium E.P. Complex Grease" Hope that helps.
HDReynoldsGenMdse 1 year ago