Tapmatic head
Loading...
Loading...
11:40
HOW TO USE A TAPPING HEADby trainman46025,603 views- 3:53
Using Taps and Diesby NewMetalworker25,242 views
- 2:22
Thread repairby baslundforreal255,023 views
- 2:22
Auto Reversing Tapping Headsby AllendaleStores9,374 views
- 1:42
How To Make a Multiple Spindle Head Drill Press a Single Chuck Unit Againby autodrill7,248 views
- 1:21
Drill Press Mortising Attachments - The Truth!by thintz128,937 views
- 1:00
Tapmatic Tools In Actionby MediaBizBuzz10,307 views
- 5:00
How It's Made Drill Bitsby thatsmynamedude239,782 views
- 2:39
Lathe tricksby gertsafari140,848 views
- 0:06
tts tapping machineby torosoglu12,829 views
- 3:53
Easy Tapping Methodby Regnarrussell19,401 views
- 7:52
Homemade ACME Tap (final).wmvby splitReaction8,097 views
- 0:16
5axis impeller machining on a haasby pdmcnc29,387 views
- 4:46
THREADING Big Holes WITH AN ENCO TAPPING HEAD tubalcainby mrpete2228,627 views
- 2:49
1.1 Machine Tool Basics - Intro to Lathe Operations - SMITHY GRANITE 3-in-1 Comboby SmithyCo34,581 views
- 0:57
Threading with a Geometric die head.mp4by DocsMachineShop5,506 views
- 0:33
How to tap hardened steelby MCtooling28,894 views
- 1:45
Tapping Machine FlexArmby nicholasikennedy12,231 views
- 0:20
Brother TC 225 Drill and Tapping Centerby jspetersmachinery7,545 views
Tapping Questions -- Part III
I want to avoid using those hand-tapping sets as I may have to do a lot in the future.
Now, as far as reversible head, what causes the head to automatically reverse? Is it that flat piece that touches the vertical rod next to spindle? When does it trigger the reverse mode? I did get one that was made from India, during my first try, it smoked instead of reversing, so I had to return it.
I appreciate any help ...thanks all. Sorry for those long questions.
mxbch2003 7 months ago
Tapping Questions --- Part II
Most of the time I get a drilled hole with no threads. If I am lucky, I will get the bottom half of the hole threaded, but not the entire hole. I set it up to various speed levels from very very slow, to mid level speed (1000 rpm). I was told the reason I can not get the tap is because the bit was slipping. It doesn't matter how much I tighten the wrench around the chuck or the collet. Do I have to get a tapmatic head to use with the machine?
mxbch2003 7 months ago
@Coiltec
Tapping Questions-- Par 1:
Hi all,
I just bought an Acer e-mill machine for my home shop. I am new in this field, but very excited to get my hands dirty so to speak because I come from an IT world.
Anyway, I have been trying to tap some holes on the e-mill using some OSG tap bits, I have tried using a chuck drill that comes with an R8 collet, and also tried using a regular collet to hold the bit. I can't seem to get a good tap.
mxbch2003 7 months ago
'
wow neat tapping the screw,,,
how about hand drill cordless
bestamerica 10 months ago
@kw757 The Tapmatic heads have an adjustable torque limit: When adjusted correctly (depending on the tap diameter), this will prevent breaking the tap.
Coiltec 1 year ago
Sometimes, when hand-tapping steel, you have to back it off to break the chips to prevent breaking the tap. How do these things deal with this issue? Thx!
kw757 1 year ago
I just bought one today. Hope it does everything I want
allancohen 1 year ago
how the hell does this work? doesnt the speed need to be really exact? im surprised it doesnt just drill it when your doing it by hand
gricka31 2 years ago
Arm mounted power tapping machines are great, if you need them and have the cash for it. Just because something is old doesn't mean anything as long as it gets the job done. One thing is for sure I can't tap a hole by hand as fast as that attachment can.
tansit2344 3 years ago 2
hi, where do I get that tapping attachment? I need to automate my manual tapping. How do I get started, hope to hear from you soon.
Nice Vid
bennytan777 3 years ago