Turbo Impeller made with Edgecam
Loading...
Loading...
12,714
Loading...
Uploader Comments (edgeteamcadcam)
see all
All Comments (5)
-
If I remember right this machine has water-cooled spindles and can hold precision within a few microns.
-
Controller runs Windows...
-
Edgecam rocks! Very nice tool path. Compare this to the impeller demo using Surfscam and you will see why Edgecam takes the cake. That jerking is the high speed forward and reverse motion along the surface profile. Slowing the cut feed would eliminate that, but why would you want to. It is only a visual thing.
-
I don't think it's machine problem as the C-axis has some small back and forwards moves. Maybe a new designed drivesurface with smoother internals could solve the problem and then just compensate to the true part surface.
-
From 2:15 and forward the tool motion is very jerky:(
Loading...
1:42
Mazak Integrex 200-IV S Impeller blade 5-axis Gibbscamby Peterthebackpacker56,299 views- 0:51
Edge Cam Videoby cryomechinc4,223 views
- 1:27
High Speed 4 Axis Machining - Handby VIBRAFREE474,352 views
- 0:16
5axis impeller machining on a haasby pdmcnc29,387 views
- 9:33
KJ 66 COMBUSTION CHAMBER MANUFACTURE part 2by TR3B1120,025 views
- 7:22
Milling operation Mazak Integrexby DEVISPRINCI275,517 views
- 2:32
hypermill daishinby xcvyc143,688 views
- 32 videosAmbo Videos
- 4:01
Impeller machining on five axis StarragHeckert machiningcenterby Starrag01231,798 views
- 3:19
Machining of an inconel turbine blade using ceramic tooling on a StarragHeckert LX 251by Starrag0112,054 views
- 3:24
Impax part made with Edgecamby edgeteamcadcam2,167 views
- 3:01
high speed precision milling 5 axis cnc Breton Ultrix impellerby TheCNCMillingmachine86,275 views
- 7:37
Mazak Integrex - Crankshaft Demo - Addy Machineryby addymachinery164,658 views
- 4:50
Mazak Variaxis 730-II-5X - Addy Machineryby addymachinery16,433 views
- 3:20
Edgecam and ECADby ecadinc10,750 views
- 1:09
HAAS VF3 with TRT210 5 axisby OMY0056,056 views
- 0:39
4 Axis CNC Lathe Simulation - Edgecamby asciidv24,650 views
- 5:52
Mazak Versatech 5-axis Double Column Series - Addy Machineryby addymachinery12,300 views
- 1:58
GibbsCAM 2009 - Mazak Integrex 5axis machiningby MrGibbsCAM10,592 views
- 0:59
MIKRON HPM 800U Ship turboby sfahrni12,964 views
Well jerky, I really dont know!
It could depend on the solid, or the lack of knowledge we had programming 5-axis in Edgecam then!
A whole different possibility could be the machine not able to process the amount of coordinates needed to make it smooth!
We are wiser now!
edgeteamcadcam 2 years ago