Mold Making - Mass Casting Complex Parts (w/ parting line)
Loading...
Link to this comment:
Uploader Comments (freemanmfg)
Top Comments
-
very good tutorial. I have been on the internet for a couple of days now searching for molding and re-fabricating. However i have a question, I am thinking of re-fabricating an old tail light of a vehicle, what kind of plastic will i need to use for the lens? does anyone know? hopefully someone could give me an answer on this. thanks
3 years ago 3
-
Chances are the horse was cast from a mold. Use a magnifying glass and try yo see where the original mold lines ran. Because of the many undercuts the horse may have been made from even a 3-part mold. Two halves per side and a third section that went between the legs. You can use clay to fill between the legs, make the two outer halves, remove the clay and cast that part last. Use a flexible silicone for deep undercuts.
3 years ago 3
All Comments (46)
-
@myrainywoods So people would click on it and watch the updated version of the video rather than the older version.
-
You shouldn't cut towards yourself. Away is the way.
-
These videos are fantastic, thanks. Do yall have any videos on how I could mold and cast something like a pipe, though?
-
WHERE CAN I BUY CASTING SILICONE TO MADE MY OWN MOLDS?..THANKS.
-
Oh that sux!! Google too is an excellent resource :P
-
Should have checked youtube first, genius.
-
can i buy your products in Italy?
- 5:26Expanding Foam Tutorialby Mogrymillian88,415 views
- 4:51How to make a two-part moldby tapplastics814,779 views
- 3:58Funny gifby vmproject836,625,411 views
- 5:39How to make a simple Silicone Mold Part 2by tapplastics174,728 views
- 4:08Life Casting: How to Make a Mold of Your Face w...by SmoothOnInc154,876 views
- 3:31Home Made Plasticby coolallizwell192,122 views
- 8:28Mold and Part Making- Brushable Silicone, Spray...by BJBEnterprises200,168 views
- 1:10Hobby Injection Moldingby dklow2002165,010 views
- 9:25Metal Casting at Home Part 10 Another Day in m...by myfordboy177,608 views
- 7:06プラモ作ろう６by fakefood5656286,080 views
- 5:52how to make a moldby JuliusShmeano102,330 views
- 4:06How to build a Mold Boxby tapplastics75,678 views
- 1:33Plastic Injection Mold Makingby mtnmold54,265 views
- 5:13How to Use Polyurethane Varnishesby JerrysArtarama43,558 views
- 6:42RTM Light process "The best case" English versi...by baxo70195,149 views
- 3:43Life Casting: How to Make a Mold of Your Hand w...by SmoothOnInc132,970 views
- 1:05How to Make a Plastic Prototype of Your Inventionby rlinventor121,692 views
- 13:40Carbon fiber Intake how-to build 2by thefabforumscom28,748 views
- 2:55Mold Making Face Cast With 880 Alginateby brickintheyard161,095 views
- 1:50Molding a model bodyby AFP32,952 views
Please contact Freeman Manufacturing & Supply
freemanmfg 9 months ago
why didnt you use clay for the bottom, instead of the wood? Yuo could've used plasticine clay for the base built up around the model
bendover2006 2 years ago
Clay wouldn't create a straight parting line. A future video will show the clay technique on a very irregular shape, but this project required a straight parting line, and therefore, we used wood.
freemanmfg 2 years ago