Getting n97 v20 and 5800 v40 latest firmware in the uk or other places where it has delayed

this video shows how you can get the latest firmware ...........without you have to wait........ayyayayayyayaa

You will need to down load Nemesis Service Suite (NSS) V 1.0.38.15. It is free (not even a trial period) and can be download from
http://www.b-phreaks.co.uk/index.php?main_page=page_2

Here is a link to the code
http://nokia.nigelcoldwell.co.uk/stuff/n97rm505pc.txt

you can check the blog incase you want full steps
http://raymond-besttechnosof200820092010.blogspot.com/2009/11/how-to-get-late...

here are the steps
Step 1.

Please backup any data before you start. And then check the backup is ok.


Step 2.

You will need to know what the product is for your phone. You will find this on the label inside the battery compartment. It is a seven digit number and will start with 05*****


Step 3.

You will need to down load Nemesis Service Suite (NSS) V 1.0.38.15. It is free (not even a trial period) and can be download from HERE

You do not need the Nokia Tool. Just download Nemesis Service Suite Beta 1.0.38.15 (zip file,6.95 MB)


Step 4.



Unzip the file and run the install.


Step 5.

Connect your N97 to your PC, and select Nokia Suite, this will not work on Mass Storage mode. But you must close Nokia Suite on your pc if it is running.



Click on the magnifying glass to scan for your phone. It should pick it up in a few seconds.


Step 6.

Once you phone has been detected, please select the Phone Info button, and then the scan button.



If you see a message "Scan for product Error!" please reconnect your phone making sure you select PC Suite. Not Mass Storage.




Step 7.

Once your phone details are in the Details/Information view plane, then enter the new product code you want to use in the Product Code field, and tick the Enable box.

For the list of codes, please see the end of this stepthru.

This is what NSS should look like before clicking on the Write button. Please do not use any other options or buttons! I haven't tested them.




Step 8.

With your new product code entered and the enable box ticked, select the Write button below the enable boxes.

After a few moments the job will be done. You will see the message "Write new values....Done"

You can now close NSS, and run the NSU and it should pick up V12 to install. Once installed, your phone will restart.

If your phone doesn't restart, or you are not happy with the way it is performing after, then please follow the spinlala post to do a hard reset.

Extra! Since posting this, some people have experienced lines and flickering screens. Do not panic, simply follow the hard reset and it will start again correctly.

HARD RESET DETAILS HERE!

Your phone should retain all your personal data on it, including any security PIN's you have setup.

Once this is done, you can repeat the above process and enter your original product code. This will not affect the upgrade at all.

Category:

Education

Tags:

• 5800
• v40

[Masseur796]

When I want to scan in NSS it gives me an error. Any ideas?

[drakecool2k]

@Masseur796 reconnect your phone and make sure it is cable not blue toothhh

[mehtab687]

@drakecool2k me to i have reconnect it and restar also but it give me error ufffffffffffffffffffffffffffff­ffffffffffffffffff help me toooooooooooooooooooo

pppplzzzzzzzzzzzzzzzzzzzzzzzzz­zzzzzzzzzz

[mastergrizli]

is that work on nokia 5800

[jamesbndo]

you are fuckin blah..blah..good explanantion...thxxx

[jamesbndo]

@Masseur796 first open the software.... then connect the phone to the pc...it will work fine...

[jamesbndo]

@Masseur796 first open the nemesis service suite..then connect your phone to the pc...in pc suite mode...then click the magnifying glass and continue the given process by the uploader..

[XnoizerulesX]

hi i have a nokia N97 RM-505 wont update can u help?

[mozzamcool]

hi bro i have nokia n97 if u update my phone he say no available new updates so what i do..

[djmatrix2000007]

thanks updatein now :P