Copy Carving
Loading...
Loading...
30,812
Loading...
Uploader Comments (roscoeguitars)
see all
All Comments (8)
-
@ssonico Good luck investing your time into the modelling and programming. Copy carving has very little setup time for different copies. Whilst CNC has its benefits, you are completely ignoring those of copy carving.
-
NIce, I've just started building electric guitars with a copy carver - who built your copy carver?
-
"terminado apagar el motor" ha ha ;)
-
You must go through a lot of router blades.
Loading...
1:48
Terrco WoodCarver - K-Starby TerrcoFPV66,979 views- 0:30
MVI 5775Dremel Carver/Duplicator Rev 1.2 - Cutting Demoby Adran0948,562 views
- 0:57
Woodcarving Duplicator Plans: Striplinbus@gmail.comby tkstriplin64,606 views
- 0:14
Copy Carver Movementby GuitarBrew37,137 views
- 6:28
copying machineby jessieyang200818,913 views
- 8:53
Milescraft 3D Pantograph for Routerby EliteToolsTV28,749 views
- 1:13
Carving machine ANDREONI.aviby comevajesus14,133 views
- 5:03
Thermwood Corporation Model 80 Carving Machineby ThermwoodCNC73,863 views
- 1:05
Neck radius routing jigby Meulmeester176,069 views
- 2:39
SN-CopyCarverby BanjoNeil67,441 views
- 0:09
Copy Carvingby PDWoodcraft20,254 views
- 5:31
Fine/Final Guitar Neck Cut on Copy Carverby GuitarBrew12,713 views
- 0:28
Pantografoby mrkens85199140,771 views
- 1:55
Rough Cut on Copy Carverby GuitarBrew5,760 views
- 6:55
Parker Guitar Forum Factory Tour 2008 - Body Carvingby lovemyP4428,264 views
- 1:45
Fine Cut on the Copy Carverby GuitarBrew7,162 views
- 5:38
Kopierfräse aus Holzby okulawa66,698 views
- 1:03
Terrco WoodCarvers - NORTHSTARby TerrcoFPV11,130 views
- 0:14
Dremel Carver/Duplicator Rev 1.2 - Motionby Adran09115,035 views
I think this is a fool work. I have 2 Scolpitrice CNC and a 5 axis CNC. For this work is much better the machinig center. And the tool is not right!
ssonico 1 year ago
Yep, we do a lot of fools work and have lots of fun doing it. Take care, KBR
roscoeguitars 1 year ago 2
copy carving is the dogs, its cheaper than cnc although fast itd take a long time to make it a worthwhile permanent investment and its way better than templates as large radiusing, siloed controls, contours are non achievable and have to be done by hand, thanks v much for posting this
getupstairstobed 2 years ago
Yeah, we love our copy carver. After the jigging and different shapes for each body are worked out the results are wonderful. It can rough carve two tops every 15 min. Our cnc does an even better job (smoother more finished surface) but the programing time is slow. I will post some views of that process someday....our digitizer arm is really cool. KBR
roscoeguitars 2 years ago
Not really. When we got the copy carver, we had about a dozen router bits made. THe bits are roughly 3/4" wide and rounded on the bottom. The tracing bit is the same shape, but smooth.
The cutters are high speed steel and we hand sharpen them before each batch (usually 8 to 12 bodies) One bit is right and the other is left handed. The rotation of the blade is also right and left. This balances the cutting resistance and make it easy and safe to operate.
KBR
roscoeguitars 3 years ago