THE "BB" FROM ALTSMOKE.COM FIRST IMPRESSIONS

::DISCLAIMER:: i did receive this product for free , but you guys know me , and i will always give my honest no BULLS**T opinion and i will never betray the reviewer / viewer trust i have worked to build with my subscribers. I have no vested interest in any of the suppliers who choose to send me products to review , and i would never and WILL never offer to give a good review in order to get receive free products or devices

this device is a perfect example of BIG power in a little package. The BB is designed to be a 3.7v device. It will run on the PROTECTED version of the Protege' battery , the 14500 , 900mah battery. The great thing is two CR2 batteries also happen to fit perfect inside providing a compact 6v vaping device.

so far ... so good... it feels sturdy like the SILVER BULLET. It has a nice button and has been vaping really well. Obviously i will report back with my findings. after i vape with it in the "real world"

thanks for the support everyone.

http://www.altsmoke.com
http://www.myspace.com/grimmgreen
http://www.grimmgreen.com
http://www.vapersforum.com

follow me on twitter @grimmgreen

Category:

Science & Technology

Tags:

• vapersforum.com
• ecig
• FDA
• dse901
• dse-901
• dse801
• dse-801
• vapor
• vape
• vaping
• vapeing
• dse
• 701
• cigar
• titan
• joye
• 510
• totally
• wicked
• 801
• janty
• stick
• e-cig
• black
• Evo
• user
• guide
• intellicig
• evolution
• EVOlution
• smoke
• smoking
• vapour
• atomiser
• ciggie
• battery
• mini
• Electronic
• e-cigarette
• e-smoking
• electric
• e-pipe
• pipe
• 901
• royal
• smoker
• puresmoker
• e-liquidmaintenance
• tecc
• usa

[FSUwestSOfresh]

did anyone find it hard to put a 306lr on this piece. it was extremely difficult to get it on and now i cant unscrew it.

[GrimmGreen]

@FSUwestSOfresh i have heard some 306 attys have threading issues.. not just with the BB , but with most mods :( where did you get your attys?

[WayTooDazedConfus3d]

Bro can you use cartos on this somehow, I really want to try this out, but I hate 3 pieces with the attys. Just tell me which cartos and I'm ordering this....lol

[GrimmGreen]

@WayTooDazedConfus3d You can use 510 cartos with the BB , i think Altsmoke even sells the cartos that work

[wolfen1057]

So, how have you recorded the audio before? On the Yeti video you commented on recording the audio from your phone. How did that work? Was it recorded separately and synced later or...?

[GrimmGreen]

@wolfen1057 yeah, back in this video i recorded the audio on my iPhone , then synced it up later when i was editing it , now i use a separate external mic

[FSUwestSOfresh]

@GrimmGreen @GrimmGreen I got them from altsmoke. I usually get my atty's from ELP. but since I was ordering from altsmoke I figured I'd try a lr306. Had to pry the damn thing out with pliers.

[WayTooDazedConfus3d]

@GrimmGreen Right on, see I thought so I just needed a confirmation thanks a lot bud.

[mdocod]

A pair of 3V rated CR2s or RCR2s are really only going to give you about 4-5V (depending on cell chemistry) on average to the atty once you factors in the losses to cell resistance. You could use an IMR14500 @ 3.7V which has much less resistance, combine that with a low resistance atty and get performance nearly on par with most 5+V setups that actually work correctly. 4.5V across a 2.3 Ohm atty is about the same as 3.7V across a 1.5 Ohm atty.

[mdocod]

lot of BS out there about the "protection" circuits increasing the safety of these cells by leaps and bounds. Most protection circuits found on modern cells allow higher than safe charge and discharge rates, and a margin of overcharge anyways. The only thing they are really doing that is useful is preventing over-discharge. FYI: almost all ecigs draw more than the maximum recommended current from small form factor LiCo chemistry cells.