Analog Drum 8-step sequencer with VCO and dual VCF.

Sorry for the shaky video. woo!

* Main clock with two dividers. One for the 'drum' section and the other for the VCO section. * 2 clock-out RCA sockets and 1 clock-in RCA socket with main clock on/off switch. * 2 LEDs to show clock rate for each section. * 'DRUM' SECTION: * 4-channel 1-8 step sequencer. 1 channel of 8 slideswitches per drum. * Rotary switch step-selection. Channel on/off switch. * This sequencer has a series of 8 LEDs underneath the switch matrix * Each 'drum' has 3 switches to alter the tone, depth and length of the sound and a push-button to trigger and/or mute, if you're that way inclined. * VCF mix dial located on the right side cheek of the box. * The VCF has 3 dials and a CV divider on a rotary switch. The dials control CV, Resonance and Filter depth. * 6.35mm jack socket. * VCO SECTION: * 1 channel 1-8 step sequencer. 8 dials to control the depth of tone that the VCO outputs. * VCO master on/off switch, located on the right side cheek of the box. * Rotary switch step-selection. * a master dial to set the pitch of the VCO. * VCF mix dial located on the right side cheek of the box. * The VCF has 3 dials and a CV divider on a rotary switch. The dials control CV, Resonance and Filter depth. * 6.35mm jack socket. * A 9v battery holder on the inside of the box. * DC power socket on the rear. Will run off upto 12v. Center negative. * Master power switch also on the rear of the box.

Category:

Science & Technology

Tags:

• Analog
• Drum
• 8-step
• sequencer
• with
• VCO
• and
• dual
• VCF
• circuit
• bent
• synth
• LFO

[gagagadget]

nice one! you really shouldn't sell the box...