Eleven Rack Tutorial - Hook Up To Another Interface With S/PDIF

WATCH IN FULL SCREEN HD... How to hook up the Eleven Rack to another interface, such as a Digidesign 003 or 002, with S/PDIF.

Look at my other videos for tutorials on how to Re-Amp when the Eleven Rack is hooked up via S/PDIF.

Category:

Howto & Style

Tags:

• Eleven
• Rack
• 11R
• 11Rack
• Digidesign
• Avid
• Guitar
• Processor
• Amp
• Simulator

[jrichview]

Can you use any RCA audio cables for these S/PDIF connections?

[BenoniStudio]

@jrichview You 'can'. But RCA cables are not 75 Ohm, so you are not getting the best quality signal. SPDIF (Digital Audio) Cables are not very expensive. You can easily purchase 2 for $20. I suggest you use SPDIF cables. The cables may be named SPDIF, Digital Audio, or Digital Coaxial. Just make sure they have the RCA style connectors and are 75 ohm

[ludobeat]

Main outputs of eleven output rack, where they connect? in digi 003?

[BenoniStudio]

@ludobeat You don't need to connect the Main Outs of the 11R if you are using the 003 as your main interface. The audio will go thorough the SPDIF ports into the 003 digitally, which is a truer signal than going analog from the 11R Main Outs to a 1/4 or XLR in on the 003

[ludobeat]

@BenoniStudio Thank you for your answer, I use a Mackie Big Knob so the output will connect the Main Output Eleven over there. And tell me, what options do I have to use the hardware connections DIGITAL I / O (AES / EBU In AES / EBU Out)? And finally, at minute 5:05 of your video a window "Hardware Setup" in pro tools (I use version 10) and only see my digi 003, you know anything about that? Your contribution to eleven users and pro tools is valuable, thank you very much

[cdvh5150]

great video... can i ask one question? i have the eleven rack n the M-audio project mix n hooked it up the way y showed but when i go to setup hardware peripherals i only see the M-audio project mix i not seeing the eleven rack, i also dont see under peripherals the clock source. what is wrong n how to i fix this... hope y can help...... have a great day....

[surfz247]

@BenoniStudio I have a 003 Black Lion Audio Mod. I'm using BLA's clock connected to the back of the 003. I have it set to 48k. AND the 11R at 48k too.

[BenoniStudio]

@surfz247 You probably have a mis match in your clock settings. Set the 003 to Internal and the 11R to External SPDIF

[surfz247]

@BenoniStudio I get a hum when tracking guitars spdif to my 003.

[BenoniStudio]

@surfz247 What do mean by no hum?