Pottery: plaster Mold Making Video Making a One-Piece Plaster Mold2.flv
Loading...
Loading...
35,078
Loading...
Uploader Comments (chinaaccenthk)
see all
All Comments (16)
-
But what do you do with the mold?
-
@sisafokker Good to leave it to dry naturally for the first time. 10 days would be v good in normal warm conditions.
-
@MelKH001 Yes you can... you can make a mould from anything really as long as you attend to the undercuts. Also you must use a good release agent.
-
If you dont have a leather hard poured piece to mold from and only an actual glaze fired piece, can you still make a mold from it?
Loading...
9:38
Mold Making: 2 piece moldby brickintheyard95,517 views- 8:11
Perfect Plasterby pbadgermw60,823 views
- 2:38
How to Make Clay Sculptures : How to Make Clay Molds & Clay Diesby expertvillage108,413 views
- 9:41
MAKING A PLASTER MOLD FOR A LANDSCAPE VASEby potteryworks8,032 views
- 7:55
Cast Designs Ornamental Mouldings Profile by PBS.VOBby CastDesignsMouldings65,077 views
- 5:50
Slip Casting in a multiple piece mold- Bailey Arend- 2010by johnbrittpottery5,472 views
- 1:37
Moulding Shopby NYMPHENBURGPORZELLAN30,600 views
- 8:54
Mold Making With Glove Mold Processby brickintheyard81,162 views
- 0:51
Reusable Mold Making Material, Making parts without the cost.by ComposiMold18,487 views
- 4:51
How to make a two-part moldby tapplastics846,791 views
- 2:30
Slip Casting at the Emma Bridgewater factory in Stoke-On-Trent, Englandby emmabridgewaterltd22,927 views
- 1:23
How to make plaster moldby arthobbycrafts102,763 views
- 0:25
Pouring plaster to make a moldby pillingpottery9,507 views
- 7:00
Make a plaster mould for any torus - and slipcast with itby 2tombarnett5,680 views
- 7:11
MAKING CERAMIC CLAY BEADS from Two Part Moldsby BHClaysmith15,536 views
- 8:25
How to Make a Two-Piece Core Mold | Mold Making Tutorialsby SmoothOnInc65,070 views
- 10:00
How to make a two part plaster mold for latex masksby LittleDPTonks23,435 views
- 6:34
How to make a Latex Moldby tapplastics273,593 views
- 5:58
Casting Glass in Ceramic Moldsby RioGrande194440,540 views
Do you think it would be harder to do miniature molds for dollhouse china (1/12 scale) or is the process pretty much the same? I would just buy the molds, but it seems that Duncan doesn't make them anymore :-/
wpederson1 11 months ago
@wpederson1 . I think you would just need a finer clay...
chinaaccenthk 11 months ago
Nice video. Could you please clarify as to how many days you have to wait until the mold is ready to be used? I´ve heard for the mold to last longer you should wait up to 10 days. Any advice? Thanks!
sisafokker 11 months ago
@sisafokker agreed yes
chinaaccenthk 11 months ago
To shave off edges I use a piece of wide snapped off hac saw blade which has really nice fine serated edges and this gradually controls the contouring shaving.- then finish with abrasive paper or dish scourer pad and rinse off as usual.
chinaaccenthk 1 year ago
What do you fill the mold with plaster or clay? Are there clay molds? I get so confused about this stuff
canaan1967 1 year ago
@canaan1967 fill with slipor liquid clay... leave for 30minutesthen pour out... it leaves aslip of say 6-10mmfresh clay lining. let that dry leathery shrinks a little then pops out...
chinaaccenthk 1 year ago