Routing Binding Channel Using A Binding Machine
Loading...
Link to this comment:
Uploader Comments (chrispaulick)
All Comments (17)
-
@chrispaulick stemac disliked 3 times, lol. awesome job
-
why not frame in that garage door?
-
Chris, I love your videos and plan to make a version of this binding machine. Just a couple of questions...
1) what is the distance between the center if the router bit and the forward edge of the router stand? This would determin the space for the guitar under the router stand.
2) Why did you use plexiglass for the router base and the bottom of the router carrige?
David Lehrer
-
@LFWOL Totally unnessecary as the counterweight does it's job prefectly. The purpose of the weight is to just to cancel out the extra weight of my router as in some cases a counter weight isn't even needed. You want downward pressure just not too much so that the shoe won't mare the soft top and make moving the cradle difficult. The pedal is just a complicated devise to add and pack away. Probably would be a tripping hazard. And besides that I use my foot to control a footswitch for the router.
-
So, Do you go from the high to low?
-
Thanks.
8:55
Routing Binding Channel Using A Binding Machine Part 2by chrispaulick9,907 views- 6:15
Inlay With A Routerby stockroomsupply24,255 views
- 8:47
Ablam Cutting Jigsby chrispaulick18,376 views
- 1:09
Rolling Pin Side Sander Short Clipby chrispaulick32,182 views
- 9:35
Making A Centerline Finder Part 3by chrispaulick4,251 views
- 9:31
Making A Radius Dishby chrispaulick28,781 views
- 9:03
Custom Neck - Headstock Binding with Curly Maple - Private Stockby PaulReedSmithGtrs14,270 views
- 7:38
Making A Rolling Pin Sander Part 2by chrispaulick48,573 views
- 9:04
Making a Precision Router baseby chrispaulick49,960 views
- 1:05
Routing the Binding Channelby GuitarBrew6,656 views
- 8:07
Ablam Cutting Jig Break Down and Add-Ons Part 2by chrispaulick19,480 views
- 2:07
50 guitar building tools anyone can makeby macdige95,087 views
- 5:00
Inlay Channel Routing Tool Vacuum And Lightby chrispaulick4,715 views
- 0:24
Router Jig movie v2by ljzimmer220,065 views
- 9:49
Making A Precision Router Base Part 2by chrispaulick16,654 views
- 4:16
Binding The Guitar Part 2by chrispaulick4,622 views
- 9:57
Binding a Carved Top Guitar in Wood Part 2by verhoevc4,666 views
- 9:49
Luthier Tips du Jour - Buffing High Gloss Finishes - O'Brien Guitarsby OBrienGuitars45,874 views
- 9:27
binding jig in actionby musicfromwood5,572 views
- 9:24
Making A Centerline Finder Part 1by chrispaulick3,575 views
About 4 1/2" and I used the plexi because that's what Mike Doolin used on his. I like using plexi for router bases because I can see through them. But these days I don't use plex too much if there is any machining that needs to be done to it like tapping especially. I've been using polycarbonate for that. Much better job with machining. If you have a plastic company near you then you can usually buy cut offs by the lb.
chrispaulick 9 months ago
Chris, great videos!! I would suggest making a slow climb cut all the way around the guitar to eliminate the need to cut from the "highs to lows". If the bit is sharp the climb cut is the most efficient way to go.
Bivouac21 2 years ago
@Bivouac21 I know some do that but I'm always worried about tear out . My bits aren't always that sharp. :o)
chrispaulick 9 months ago
Yes.
chrispaulick 2 years ago
The router is a PC310.
chrispaulick 3 years ago