Shooting JG BAR-10 with GoldenBall .30 g BBs at 150 ft

Here's a video of me shooting my JG BAR-10 at a Pepsi can at 150 ft. I measured it with a Nikon rangefinder. I have a TM Precision Hopup Unit in it, and I've done the airbrake mod, and lightened the trigger, and made a mock mock mock mock mock mock mock silencer for it, and some other things. As you can see, it shoots really well.

Category:

Sports

Tags:

• JG BAR-10
• GoldenBall
• Airsoft
• VSR-10
• Shooting
• Silencer

[Eversmen]

when i load my magazine with more than 1 bb and put it in the gun it makes all the bb's go into the gun and it wont allow me to push the bolt all the way back in, and i take the mag out and have to move the bolt back and forth for it to get all the bb's out. whats wrong with my gun?

[GringotheHunter]

@Eversmen I'm not sure man, sounds like your mag may be disfunctional.

[bmx65]

Every single one of those would have hit a man at 150ft easy, You have an accurate gun for sure, I'd like to see the results in the woods where No wind is present.

A few Questions too, I have a UTG L96 with a PDI barrel and Hop-up. How do you like those Goldenballs? and do you like Madbull? if you have tried them.

[GringotheHunter]

@bmx65 I love the Goldenballs, I've never tried Madbull BBs. I rinse my BBs in soap though, which makes them more consistent, I feel.

[bmx65]

@GringotheHunter I have heard of people washing there bbs, I know it gets something off the bb, what exactly does it do?

[GringotheHunter]

@bmx65 Using an oil-cutting dish soap, it removes the lubrication from the BB (that may be inconsistently applied) and, in my experience, helps make the gun WAY more consistent with the hop-up. To prove my point, this video was done pre-wash. My other video of me shooting the BAR-10 was done post-wash. The results speak for themselves.

[TheAirsoftinPeople]

Im looking for a silencer for my jg bar-10 does anyone know any

[RagingBullAirsoft]

Do you live in a rain forest?

[zebombers]

Can I use the ks us socom (echo1) upgrade bolt in the jg bar10?

[airsoftassasins]

Where in the US can you find .28 or heavier goldenballs? Thanks.

[Eversmen]

@xXAirsoftLordXx i've done sent it back and got my $ back its dissapointing this didnt work out right.

[xXAirsoftLordXx]

@Eversmen Yea Defiantly the mag take it apart and oil it or get a new one for 12$

[airsoftbrother]

It's as basic as the heavier your bbs the more accurate your gun is. And just because the fps is lower doesn't mean the range decreases, just it takes a little bit longer for your bb to reach your target, I'm talking about half a second or so.

[MrBruce1337]

is this gun stock, im tried using .20 in my bar 10, but accuracy is terrible, i want to buy .25, or .28's, but not sure, im keepn the gun stock for now, so im trying 2 determine which ammunition to buy.

[TRNJAIRSOFT]

i have a well mb07 and its hopup wont hop .3s.... im considering getting an aftermarket jg chamber because every seems to say that the jg chambers hopup .3s without a problem. have you ever had a problem with your hopup?

[maxrylluc]

@marfnugget yes it's true that hop up is the main soul,but fps also affect the range too (but less accuracy), tight and long inner barrel affect the accuracy. so if we combine three of that, hop up, fps and tight barrel, it must be a great sniper riffle in airsoft gun...

*but truly i'm not a big fps minded, i'm just curious what should i do for having much accuracy in 150 feets without increasing the fps, mine is TM precision hop up unit +edgi tight barrel but just have 100feet