Arduino+ SoftSerial + Sparkfun XBee Shield + iPhone TouchOSC + Processing + oscP5

Comment If you have any questions:

TouchOSC iPhone App + TouchOSC Editor
Using Ladyada Softserial - To relay PC commands to xbee module
oscP5 Library - For iphone interface

References:
http://www.sparkfun.com/tutorials/152
http://forums.fungizmos.com/viewtopic.php?f=6&t=4
http://nootropicdesign.com/projectlab/2010/03/04/wireless-robotics-platform/

@littleheadiris I believe this is the code that the receiver arduino gets: https://docs.google.com/document/pub?id=1z5qTyVqrR1p7ToYcpEaMeAPXMolVyWBQ_410... and the other arduino attached to the laptop is found here http://forums.fungizmos.com/viewtopic.php?f=6&t=4 the processing code is found here https://docs.google.com/document/pub?id=1aBUGt5wz9jsBrXHj9uqSRDghjZxDLMncPdWk...

Category:

Howto & Style

Tags:

• Softserial
• iphone
• RC
• Controller

[12725oscar]

Hi vietboidacbiet i wanna make this proyect but i dont working, so i dont speak english. can you help me...

[vietboidacbiet]

@12725oscar check out the description i added some code if it helps.

[dghdany]

Hi there , nice work . I have a quick question how did u manage to enable the passthrough using the sparkfun shield I notice that you have soldered something on the left hand side but I dont know what exactly it is ? A little help will be greatly appreciated. Thanks

[vietboidacbiet]

@dghdany Since digital pins 1 and 2 are used for tx and rx. The newer shields have two jumper "pins" or solder jumper as they call it. You can wire those two jumpers on the shield to the digital pins of or choice. You then use ladyadas softserial to utilize those pins that you chose. You will have to play around with with which pin is tx and which one is rx. In my case I chose pin 3 and 4 an initialized it in the softserial.

[littleheadiris]

@vietboidacbiet Hey, where can I see the description? Is it shared? I don't see it anywhere... Sorry...

[vietboidacbiet]

@littleheadiris hey thanks! check out the description. I added some links let me know if you can see them. I haven't work on or looked at the code in a long time so I'm not 100% sure they will work. Might need some connecting the dots work. Hope it helps thanks for watching.

[littleheadiris]

@vietboidacbiet Hi, Great job! I'm wondering if you'd like to share some more info, like the code you are using? Or is there any website I can check out? Thanks!

[dghdany]

@vietboidacbiet Thanks for the reply :)

[vietboidacbiet]

Since digital pins 1 and 2 are used for tx and rx. The newer shields have two jumper "pins" or solder jumper as they call it. You can wire those two jumpers on the shield to the digital pins of or choice. You then use ladyadas softserial to utilize those pins that you chose. You will have to play around with with which pin is tx and which one is rx. In my case I chose pin 3 and 4 an initialized it in the softserial.